Out of curiosity. Why did you switch away from the BB and MK to LinuxCNC? John
> -----Original Message----- > From: Robert Murphy [mailto:robert.mur...@gmx.com] > Sent: December-12-20 9:43 PM > To: emc-users@lists.sourceforge.net > Subject: Re: [Emc-users] Beaglebone and MachineKit > > I used a 3 board solution on my BBB before switching from MK to Linuxcnc. > > https://github.com/ozzyrob/pp_cape > > https://github.com/ozzyrob/pp_bob_input > > https://github.com/ozzyrob/pp_bob_output > > > The cape attaches as normal and the 2 other boards sit either side > connected by a short ribbon cable. > > Still have a few sets of boards left over, and one set of 3 fully built > that I used but no longer have a use for. > > There are pretty basic but I found them to work without any issues. > > On 13/12/20 7:18 am, Alan Condit wrote: > > Marcus, > > > > Jon Elson (Pico-systems) sells the Cramps board designed by Charles > > Steinkuehler that can run six Pololu stepper drives (like 35v 1 to 2 amps). > > I designed a little PCB that can plug into three of the stepper driver > > sockets to allow it to control 3 external drives. They are or were > > available on OSHPark as CRAMPS-BOB3-a3. > > > > Alan > > > > > >> From: marcus.bow...@visible.eclipse.co.uk > >> To: EnhancedController <emc-users@lists.sourceforge.net> > >> Cc: > >> Bcc: > >> Date: Sat, 12 Dec 2020 19:38:12 +0000 > >> Subject: [Emc-users] Beaglebone and MachineKit > >> John (or anyone else), > >> > >> Is there a 'cape' currently available to suit the Beaglebone Black > >> running MachineKit or LinuxCNC? > >> I know there used to be a cape specifically for that purpose, but it has > >> been out of production for some time. > >> I have a Beaglebone I would like to press into service running either > >> LinuxCNC or MachineKit. > >> Are images available for both? > >> > >> Marcus > >> > >> > > _______________________________________________ > > Emc-users mailing list > > Emc-users@lists.sourceforge.net > > https://lists.sourceforge.net/lists/listinfo/emc-users > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
