Can OpenSCAD export to .STEP files?  If so then the design is exportable to
a wide range of CAM software for toolpath generation.    Fusion (free
version) can import STEP and produce toolpaths but isn't this housing
simple enough for hand-coding files?

On Sun, Mar 21, 2021 at 10:14 AM Gene Heskett <ghesk...@shentel.net> wrote:

> Greetings all;
>
> What do we have that can convert a .stl file into gcode for a mill or a
> lathe?
>
> I think I have the 4 internal pieces ready to install in some sort of a
> housing, so I ordered a couple hacksaw blades for my bandsaw and bought
> some 2" thick alu bar for the output side of this thing.
>
> I have some 1" that will make the input half of the housing, make it up
> square so I'll have room for corner bolts to mount it with. But with the
> need for 2 bearings on the output, seperated by enough space to be
> rigid, I'll do it from 2" stock. But I think I'd like to make 2, one
> small enough to drive with a nema 17. But I'll need to make a metal
> armature for that because these 85 oz 17's I have run pretty hot. Too
> hot for plastic bearing carriers. So far I haven't stumbled over a 3
> phase nema 17, yet. But I keep looking.
>
> Now that I have at least a Mr so and so familiarity with openscad, no
> means an expert, I think I'd like to see about drawing the housing parts
> up in openscad, and possibly generating some gcode from its .stl output.
>
> Can pycam do that?
>
> Cheers, Gene Heskett
> --
> "There are four boxes to be used in defense of liberty:
>  soap, ballot, jury, and ammo. Please use in that order."
> -Ed Howdershelt (Author)
> If we desire respect for the law, we must first make the law respectable.
>  - Louis D. Brandeis
> Genes Web page <http://geneslinuxbox.net:6309/gene>
>
>
> _______________________________________________
> Emc-users mailing list
> Emc-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/emc-users
>


-- 

Chris Albertson
Redondo Beach, California

_______________________________________________
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to