For me it's delivery in one week and with taxes just under $20. Thanks John
> -----Original Message----- > From: ken.stra...@gmail.com [mailto:ken.stra...@gmail.com] > Sent: January-12-22 5:28 AM > To: 'Enhanced Machine Controller (EMC)' > Subject: Re: [Emc-users] ER-32 Collet Wrench > > https://www.amazon.ca/ER-32UM-Spanner-Precision-Milling-Clamping/dp/B089RXC7K1 > ca$18.50 delivered tomorrow. > > -----Original Message----- > From: John Dammeyer <jo...@autoartisans.com> > Sent: January 12, 2022 3:48 AM > To: Enhanced Machine Controller (EMC) <emc-users@lists.sourceforge.net> > Subject: [Emc-users] ER-32 Collet Wrench > > So my Collet chuck arrived a week or so ago. Today the ER-32 collet set > arrived. I no longer have an excuse for not completing my > 4th axis driven by a real harmonic drive. (Well it is raining and can't > cast). So I have drawn up the face plate adaptor and that looks > to be a pretty easy LCNC project for the mill plus a bit of lathe work. > > However, I foolishly did not order a collet wrench. This seems to overall be > a pretty easy CNC project with the exception of the > 'teeth' that engage the collet. I suppose I could mill out the profiles in > some oil hardening steel, then file the teeth to have straight > edges. Finally harden it. > > Alternatively make it out of 1/4" or so steel plate (or even aluminium) and > drill and tap holes for screws to protrude out where the > teeth are. Turn down the screw ends to be smooth or even square and lock the > screws in place. > > Looking for suggestions here. Don't really want to wait 2 months for one > wrench with either low price and horrendous shipping or > high price and low shipping. Cost ends up being the same at about $28. > > Thanks, > John > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users