> From: gene heskett [mailto:[email protected]] > > On 2/12/26 12:06, John Dammeyer wrote: > >> HI all, > >> This popped up on my amazon feed. > >> https://www.amazon.ca/InnoView-Portable-Touchscreen-10-Point- > Protective/dp/B > >> > >> 0DFLZTG9W/ref=sr_1_6?th=1 > >> � � Listed as 15.6" 1080P with 10 point touch screen.� Is something > >> like this > >> usable with LinuxCNC and one of the Touch Screen interfaces? > >> Thanks > >> � John > Option "Device" "/dev/input/event0" #edit the 0 to match the src you found > Option "Name" "touch screen" > #Option "GrabDevice" "true" > Option "InvertY" "true" > Option "Calibration 0 1024 0 600" #edit to suit your screens pixels by > pixels > Option "Emulate3Buttons" "true" > Option "Emulate3Timeout" "50" > EndSection > > �I hope this is a bit of help John.� And I'm developing a profound hate > for t-bird.
Thanks Gene Well I bit the bullet and ordered one. Should be here tomorrow. Not so concerned about more than one touch but more concerned as to which touch screen user interface works best with smaller screens like this. Part of me wants to dive in for an ASUS 20" 1080P screen but they are over $400 which is a much bigger risk if it doesn't work. John _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
