Steve, I'll add my two cents based on my experience troubleshooting the Zilla. Your subject line says the Zilla won't come on. But it also says no error codes are being thrown. Is the Hairball dead (no lights coming on, no ability to communicate via serial) or just not closing the contactor (any lights on the Hairball coming on or ability to communicate with the Hairball via the serial terminal)?
My experience is that the Hairball will power up with less than 12V. So I wouldn't think that is the problem. Now whether your specific contactor will close on less than 12V is another question. I would start with the contactor and apply 12V directly to see if it closes. Next step would be to see if the Hairball is getting the ignition start signal. Easy enough to check if 12V is reading on start input (pin 4) and ignition key/run input (pin 3). As an aside my car has a clutch interlock switch on the ignition start. If the clutch is not depressed there is not 12V on the ignition start. Took me "more than a few minutes" when I first converted my EV to figure out why I was not getting 12V when putting the ignition into the start position. If you can close the contactor manually and the 12V signal is getting to the Hairball post the results and I'll make a few more suggestions. Good luck, Barry >> Date: Thu, 30 May 2013 06:47:18 -0400 >> From: [email protected] >> To: [email protected] >> Subject: [EVDL] Zilla won't come on, no error codes. Please help >> >> I am trying to help a friend with a conversion that was working fine and >> now Zilla won't pull in the main contactor. As I understand it, the car >> was fine 9 months ago. But, it was parked for 9 months. Main pack still >> checks OK now that he charged it. It was a lithium pack and stored at a >> low SOC for 9 months. But, the controller will not come on. >> >> I had a similar issue on my truck when I parked it for several months. All >> I did to get it working was to unhook both 12V and main pack, let sit a few >> minutes, and then rehook. It started working. It did take a few tries to >> get it working. Ultimately, I had an intermittent due to the impact >> sensor. I bypassed it and the zilla worked great. I have no idea why his >> doesn't work. >> >> But, he is having issues and I don't know what it could be. All I do know >> is that both the main pack and 12V were low. Main pack was probably low >> enough to trip the undervoltage on the Zilla. 12V system is reading >> between 12.5 and 12.6 unloaded. I think that may be the issue. I told him >> that the Zilla is picky about its input voltage and he needs 13.2. That's >> my experience from my truck. He needs the DC-DC plugged in and working I >> think. It is currently disconnected. That's all I could come up with. He >> isn't getting any error codes on the zilla. It's like it isn't seeing the >> signal to pull in the contactor. Or, it got scrambled up some how and the >> hairball has lost its mind, highly unlikely. >> >> He wants to know what to try next. Also, if he can't get it working, where >> can he send the hairball to to have it checked out? I can't help because >> my truck is sold so I have no way to test the hairball for him. This is >> really puzzling to me. I think it is the 12V being too low, but looking >> for your experience with intermittent startup on the zilla. By the way, >> the car was working and driven 20k miles as an EV, so it is "wired wrong." >> It just quit from sitting we think. Nothing is changed in the wiring. He >> did find the DC-DC had an intermittent connection which is why he unplugged >> it. >> >> Steve Powers >> Atlanta >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/8af3ba66/attachment.htm> >> _______________________________________________ >> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub >> http://lists.evdl.org/listinfo.cgi/ev-evdl.org >> For EV drag racing discussion, please use NEDRA >> (http://groups.yahoo.com/group/NEDRA) >> > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > <http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/3cacd784/attachment.htm> > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA > (http://groups.yahoo.com/group/NEDRA) > _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
