All good suggestions so far and all included in the Zilla manual which you
will want to have on hand and use.

I did experience Hairball failure from moisture.  Seems a few well-placed
drops can do it in.  I sent  it back and they fixed it pretty quick, but it
did cost about a bill if I remember correctly.

Which leads to my chant:
All electric vehicle components need to be IP67.
All electric vehicle components need to be IP67.
All electric vehicle components need to be IP67.
All electric vehicle components need to be IP67.



On Thu, May 30, 2013 at 4:47 AM, Steve Powers <[email protected]>wrote:

> I am trying to help a friend with a conversion that was working fine and
> now Zilla won't pull in the main contactor.  As I understand it, the car
> was fine 9 months ago.  But, it was parked for 9 months.  Main pack still
> checks OK now that he charged it.  It was a lithium pack and stored at a
> low SOC for 9 months.  But, the controller will not come on.
>
> I had a similar issue on my truck when I parked it for several months.  All
> I did to get it working was to unhook both 12V and main pack, let sit a few
> minutes, and then rehook.  It started working.  It did take a few tries to
> get it working.  Ultimately, I had an intermittent due to the impact
> sensor.  I bypassed it and the zilla worked great.  I have no idea why his
> doesn't work.
>
> But, he is having issues and I don't know what it could be.  All I do know
> is that both the main pack and 12V were low.  Main pack was probably low
> enough to trip the undervoltage on the Zilla.  12V system is reading
> between 12.5 and 12.6 unloaded.  I think that may be the issue.  I told him
> that the Zilla is picky about its input voltage and he needs 13.2.  That's
> my experience from my truck.  He needs the DC-DC plugged in and working I
> think.  It is currently disconnected.  That's all I could come up with.  He
> isn't getting any error codes on the zilla.  It's like it isn't seeing the
> signal to pull in the contactor.  Or, it got scrambled up some how and the
> hairball has lost its mind, highly unlikely.
>
> He wants to know what to try next.  Also, if he can't get it working, where
> can he send the hairball to to have it checked out?  I can't help because
> my truck is sold so I have no way to test the hairball for him.  This is
> really puzzling to me.  I think it is the 12V being too low, but looking
> for your experience with intermittent startup on the zilla.  By the way,
> the car was working and driven 20k miles as an EV, so it is "wired wrong."
>  It just quit from sitting we think.  Nothing is changed in the wiring.  He
> did find the DC-DC had an intermittent connection which is why he unplugged
> it.
>
> Steve Powers
> Atlanta
> -------------- next part --------------
> An HTML attachment was scrubbed...
> URL: <
> http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130530/8af3ba66/attachment.htm
> >
> _______________________________________________
> UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
> http://lists.evdl.org/listinfo.cgi/ev-evdl.org
> For EV drag racing discussion, please use NEDRA (
> http://groups.yahoo.com/group/NEDRA)
>
>


-- 
Marcus Reddish

*North Valley Systems LLC*
Stevensville, Montana
406-360-8628
northvalleyev.com
-------------- next part --------------
An HTML attachment was scrubbed...
URL: 
<http://lists.evdl.org/private.cgi/ev-evdl.org/attachments/20130601/e186a253/attachment.htm>
_______________________________________________
UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub
http://lists.evdl.org/listinfo.cgi/ev-evdl.org
For EV drag racing discussion, please use NEDRA 
(http://groups.yahoo.com/group/NEDRA)

Reply via email to