Glancing through the other replies, there is an easy fix I haven't seen mentioned (my apologies if I missed it).
It sounds like it would be a good idea to get the 12V battery a few quality hours with a battery charger! I don't know anything specifically about the Zilla, but I do know that my system doesn't behave well with the 12V battery low. However, 12V chargers are pretty easy to find (even to borrow), so I would expect that to be an easy first step. Mike > -----Original Message----- > From: [email protected] [mailto:[email protected]] On > Behalf Of Steve Powers > Sent: Thursday, May 30, 2013 4:47 AM > To: [email protected] > Subject: [EVDL] Zilla won't come on, no error codes. Please help > > I am trying to help a friend with a conversion that was working fine and now > Zilla won't pull in the main contactor. As I understand it, the car was fine 9 > months ago. But, it was parked for 9 months. Main pack still checks OK now > that he charged it. It was a lithium pack and stored at a low SOC for 9 > months. But, the controller will not come on. > > I had a similar issue on my truck when I parked it for several months. All I did > to get it working was to unhook both 12V and main pack, let sit a few > minutes, and then rehook. It started working. It did take a few tries to get it > working. Ultimately, I had an intermittent due to the impact sensor. I > bypassed it and the zilla worked great. I have no idea why his doesn't work. > > But, he is having issues and I don't know what it could be. All I do know is > that both the main pack and 12V were low. Main pack was probably low > enough to trip the undervoltage on the Zilla. 12V system is reading between > 12.5 and 12.6 unloaded. I think that may be the issue. I told him that the Zilla > is picky about its input voltage and he needs 13.2. That's my experience from > my truck. He needs the DC-DC plugged in and working I think. It is currently > disconnected. That's all I could come up with. He isn't getting any error > codes on the zilla. It's like it isn't seeing the signal to pull in the contactor. Or, > it got scrambled up some how and the hairball has lost its mind, highly > unlikely. > > He wants to know what to try next. Also, if he can't get it working, where can > he send the hairball to to have it checked out? I can't help because my truck > is sold so I have no way to test the hairball for him. This is really puzzling to > me. I think it is the 12V being too low, but looking for your experience with > intermittent startup on the zilla. By the way, the car was working and driven > 20k miles as an EV, so it is "wired wrong." > It just quit from sitting we think. Nothing is changed in the wiring. He did > find the DC-DC had an intermittent connection which is why he unplugged it. > > Steve Powers > Atlanta > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: <http://lists.evdl.org/private.cgi/ev- > evdl.org/attachments/20130530/8af3ba66/attachment.htm> > _______________________________________________ > UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub > http://lists.evdl.org/listinfo.cgi/ev-evdl.org > For EV drag racing discussion, please use NEDRA > (http://groups.yahoo.com/group/NEDRA) _______________________________________________ UNSUBSCRIBE: http://www.evdl.org/help/index.html#usub http://lists.evdl.org/listinfo.cgi/ev-evdl.org For EV drag racing discussion, please use NEDRA (http://groups.yahoo.com/group/NEDRA)
