Richard, The 1500/3000 are both wired the same. Look very closely at the internal pins or "fingers" of the 3000 to make sure they are ok..
* FLEX-3000/1500 Microphone Pinout Configuration * *Pin Number* *Function* 1 Increase the VFO frequency up by the Tune Step value 2 Decrease the VFO frequency down by the Tune Step value 3 Vcc (+5 VDC) 4 Microphone Ground (mic -) 5 Microphone In (mic +) 6 PTT (PTT +) 7 PTT Ground (PTT -) 8 Change to the next Tune Step value 73, Dudley WA5QPZ FlexRadio Systems (512) 250-8595, Option 2 Email: [email protected] Web: www.flex-radio.com "Tune in excitement!" ™ On Sat, Sep 4, 2010 at 11:13 AM, richard allen <[email protected]> wrote: > I'm trying to get my Heil Proset working on my flex-3000 and flex-1500. It > came from FlexRadio with a Heil adapter, AD-1-YM. I also have a Yaesu MH-31 > hand mic. > > The hand mike works fine on both the 3000 and 1500 (the up down buttons are > not available on the 1500, unfortunately). The proset with adapter works on > the 1500 but not on the 3000. > > It appears that only pins 4, 5, and 6 are connected thru the adapter to the > radio, mic-, mic+, and ptt. Both the 3000 and 1500 manuals say that ptt > should use pins 6 and 7, not 6 and 4. > > Does anyone understand all this and have any suggestions? I seem to > remember some problems mentioned here a while back but can't find them. > > Varying the mic gain does not do anything on the Heil (meter sits at -30 > dB) but works as advertised with the hand mike. > > Thanks, > > Richard W5SXD > > _______________________________________________ Flexedge mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexedge_flex-radio.biz This is the FlexRadio Systems e-mail Reflector called FlexEdge. It is used for posting topics related to SDR software development and experimentalist who are using beta versions of the software.
