[Flexradio] V1.3.3 resolves audio problem using USB interface

[Pedlow, Lee]

Hi:   Quick note to let folks know that a problem I have been continuously been seeing with ALL previous versions supporting USB, including 1.2.0, is magically fixed in v1.3.3.  Previously reported was an issue wherein audio is heard when the “power” GUI was turned off if the USB interface is used, but when the PIO is used it performs correctly.  Others had attributed it to ground loops, etc. (it isn’t) and I can hear a relay activate the mutes the audio.  I hadn’t the time recently to trace it, but I did download code and saw that 1.3.3 fixed it, again proving it’s not grounding.  I have both 1.2.0 and 1.3.3 loaded and can flip back and forth from no problem to problem depending upon the last version used and exited from.   SUGGESTION:  Please change the windows button box marked “POWER” to “Standby” “or “Active” or the like.  It is not a power switch and at some point you’ll run afoul of the regulatory folks in the US or Europe (especially when selling finished goods).  Power is still flowing through the radio when the UI indicates otherwise based upon the nomenclature.  It could even become a liability issue from an observant gold digger (that’s the last thing you need).   Best regards,   Lee Pedlow (リー ペドロ) Systems Engineering Sony Electronics, Inc. San Diego, CA (858) 942-2538 [EMAIL PROTECTED]   CONFIDENTIAL This email is covered by the Electronic Communications Privacy Act, 18 U.S.C. 2510-2521 and is legally privileged. This e-mail is intended only for the personal and confidential use of  the individual(s) to which it is addressed and may contain confidential information.  If you are not the intended recipient, you are hereby notified that you have received this document in error, and that any review, distribution, copying or disclosure is not authorized.  If you have received this communication in error, please notify the sender immediately by telephone and destroy the message.