Lee: I would not be so happy. There were many hardware control bugs in 1.3.3 all dealing with the new state machine for controlling hardware not being initialized correctly. (No amp keying, PA bias not set, etc.). I would trust nothing, including the "fix" until you get 1.3.4 in your hands.
I agree that these things are ornery but I would wait to say it is cured. I agree with you on Active and Standby. I never did like PowerOn/Off. Bob Pedlow, Lee wrote: > Hi: > > Quick note to let folks know that a problem I have been continuously > been seeing with ALL previous versions supporting USB, including > 1.2.0, is magically _fixed_ in v1.3.3. Previously reported was an > issue wherein audio is heard when the “power” GUI was turned off if > the USB interface is used, but when the PIO is used it performs > correctly. Others had attributed it to ground loops, etc. (it isn’t) > and I can hear a relay activate the mutes the audio. I hadn’t the time > recently to trace it, but I did download code and saw that 1.3.3 fixed > it, again proving it’s not grounding. I have both 1.2.0 and 1.3.3 > loaded and can flip back and forth from no problem to problem > depending upon the last version used and exited from. > > *_SUGGESTION_*: Please change the windows button box marked “POWER” to > “Standby” “or “Active” or the like. It is not a power switch and at > some point you’ll run afoul of the regulatory folks in the US or > Europe (especially when selling finished goods). Power is still > flowing through the radio when the UI indicates otherwise based upon > the nomenclature. It could even become a liability issue from an > observant gold digger (that’s the last thing you need). > > Best regards, > > Lee Pedlow (リー ペドロ) > Systems Engineering > > Sony Electronics, Inc. > > San Diego, CA > > > (858) 942-2538 > [EMAIL PROTECTED] > > *CONFIDENTIAL* > > //This email is covered by the Electronic Communications Privacy Act, > 18 U.S.C. 2510-2521 and is legally privileged. This e-mail is intended > only for the personal and confidential use of the individual(s) to > which it is addressed and may contain confidential information. If you > are not the intended recipient, you are hereby notified that you have > received this document in error, and that any review, distribution, > copying or disclosure is not authorized. If you have received this > communication in error, please notify the sender immediately by > telephone and destroy the message.// > >------------------------------------------------------------------------ > >_______________________________________________ >FlexRadio mailing list >[email protected] >http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >
