Guys Doesn't matter too much what you call it. On Teamspeak when we refer to any button on the SDR we call it "Uh Oh what did I do now." (smile). Who knows when you click on that button -- It might really be a POWER button! The miracle of software!
A little levity in the seriousness of the conversation! Eric - AA4SW -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] biz] On Behalf Of Willi Reppel Sent: Friday, June 10, 2005 5:34 PM To: [email protected] Subject: Fw: [Flexradio] V1.3.3 resolves audio problem using USB interface ----- Original Message ----- From: "Willi Reppel" <[EMAIL PROTECTED]> To: "Robert McGwier" <[EMAIL PROTECTED]> Sent: Friday, June 10, 2005 11:25 PM Subject: Re: [Flexradio] V1.3.3 resolves audio problem using USB interface > Hi Lee & Bob, > > I fully agree that power button is not a suitable denomination. On > commercial products which contain microprocessor controls this button / > indicator carries often the designation "Run" which comes closer to what > this button really actuates and indicates. > > Best 73´s de SM6OMH Willi > > ----- Original Message ----- > From: "Robert McGwier" <[EMAIL PROTECTED]> > To: "Pedlow, Lee" <[EMAIL PROTECTED]> > Cc: "FlexRadioMail" <[email protected]> > Sent: Tuesday, May 10, 2005 12:12 AM > Subject: Re: [Flexradio] V1.3.3 resolves audio problem using USB interface > > >> Lee: >> >> I would not be so happy. There were many hardware control bugs in 1.3.3 >> all dealing >> with the new state machine for controlling hardware not being >> initialized correctly. >> (No amp keying, PA bias not set, etc.). I would trust nothing, including >> the "fix" >> until you get 1.3.4 in your hands. >> >> I agree that these things are ornery but I would wait to say it is cured. >> >> I agree with you on Active and Standby. I never did like PowerOn/Off. >> >> Bob >> >> >> Pedlow, Lee wrote: >> >>> Hi: >>> >>> Quick note to let folks know that a problem I have been continuously >>> been seeing with ALL previous versions supporting USB, including >>> 1.2.0, is magically _fixed_ in v1.3.3. Previously reported was an >>> issue wherein audio is heard when the “power” GUI was turned off if >>> the USB interface is used, but when the PIO is used it performs >>> correctly. Others had attributed it to ground loops, etc. (it isn’t) >>> and I can hear a relay activate the mutes the audio. I hadn’t the time >>> recently to trace it, but I did download code and saw that 1.3.3 fixed >>> it, again proving it’s not grounding. I have both 1.2.0 and 1.3.3 >>> loaded and can flip back and forth from no problem to problem >>> depending upon the last version used and exited from. >>> >>> *_SUGGESTION_*: Please change the windows button box marked “POWER” to >>> “Standby” “or “Active” or the like. It is not a power switch and at >>> some point you’ll run afoul of the regulatory folks in the US or >>> Europe (especially when selling finished goods). Power is still >>> flowing through the radio when the UI indicates otherwise based upon >>> the nomenclature. It could even become a liability issue from an >>> observant gold digger (that’s the last thing you need). >>> >>> Best regards, >>> >>> Lee Pedlow (リー ペドロ) >>> Systems Engineering >>> >>> Sony Electronics, Inc. >>> >>> San Diego, CA >>> >>> >>> (858) 942-2538 >>> [EMAIL PROTECTED] >>> >>> *CONFIDENTIAL* >>> >>> //This email is covered by the Electronic Communications Privacy Act, >>> 18 U.S.C. 2510-2521 and is legally privileged. This e-mail is intended >>> only for the personal and confidential use of the individual(s) to >>> which it is addressed and may contain confidential information. If you >>> are not the intended recipient, you are hereby notified that you have >>> received this document in error, and that any review, distribution, >>> copying or disclosure is not authorized. If you have received this >>> communication in error, please notify the sender immediately by >>> telephone and destroy the message.// >>> >>>------------------------------------------------------------------------ >>> >>>_______________________________________________ >>>FlexRadio mailing list >>>[email protected] >>>http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >>> >>> >> >> >> >> _______________________________________________ >> FlexRadio mailing list >> [email protected] >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> > _______________________________________________ FlexRadio mailing list [email protected] http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
