This is exactly what it looks like when/if the DDS quits running. Contact us directly about getting the unit serviced. You might look through the various ECOs on the private downloadp age if your unit is not up to date.
Eric Wachsmann FlexRadio Systems > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of Wayne Roth > Sent: Friday, September 30, 2005 1:57 PM > To: FlexRadio@flex-radio.biz > Subject: [Flexradio] Receiver dies 2 min after power-up, ideas? > > My SDR-1000 (an older rev box with RFE, no PA or tuner, parallel port > interface) receives fine for the first couple of minutes then goes deaf. > Cycling the DC power restores the receiver for another couple minutes, > then > it dies again. Just before it craps out, the baseline as viewed on the > spectral display raises from -130 to about -70 a couple times along with > an > increase in the white noise, then drops to -140. All frequencies appear > to > be dead. Restarting the software has no effect, so it's a hardware issue. > I have yet to open the enclosure and get the scope out, just wondering if > anyone has seen this, or has a suggestion on where to start looking. > > Best Regards, > Wayne > WA2N / 5 Austin Tx > > > _______________________________________________ > FlexRadio mailing list > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz