> -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > radio.biz] On Behalf Of [EMAIL PROTECTED] > Sent: Monday, August 13, 2007 3:10 PM > To: flexradio@flex-radio.biz; [EMAIL PROTECTED] > Subject: Re: [Flexradio] A/J/O + 100 watt SDR 1K > > I'm confused!
That makes two of us ! > > I have been running AJOFlex since day one and all versions (1.6, 1.9, > 1.91) > read my forward and reverse powers and display the powers correctly > as well as calculating/displaying the SWR on PowerSDR. My only > connection to the PC is via USB. > I must admit, I'd only assumed that the power levels being reported were correct - when everything appears to work there doesn't seem to be a reason to go looking for problems. If, as Bill indicates, that the firmware is incomplete, then it must be a first in the history of computers that it works and appears to work well ! I'd have expected to see some smoke by now ;) I'm really curious to hear what the dickens it is doing with the current state of the firmware and also if there was some documentation I missed during initial setup that would have advised against using the USB control option if the 100w PA is present - I've got to believe that most of the SDR-1Ks connected to A/J/O are NOT the 1w variety. Pete, N3EVL _______________________________________________ FlexRadio mailing list FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archive Link: http://www.mail-archive.com/flexradio%40flex-radio.biz/ FlexRadio Knowledge Base: http://kb.flex-radio.com/ FlexRadio Homepage: http://www.flex-radio.com/