Maybe do the rx calibration routine? Sounds like the signal levels are not calibrated. What level on the PowerSDR panadapter is the baseline noise?
73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Sat, Mar 27, 2010 at 9:37 PM, Drax Felton <draxfel...@gmail.com> wrote: > On the Soundcard options in dm780 is says the 0db is for transmit, not > receive. > > But I do have it set to 0. > > > > > > > > *From:* Neal Campbell [mailto:nealk...@gmail.com] > *Sent:* Saturday, March 27, 2010 9:02 PM > *To:* Drax Felton > *Cc:* flexradio@flex-radio.biz > > *Subject:* Re: [Flexradio] OK now PSK31 weirdness > > > > When any digital program says its being overloaded, there is no telling > what artifacts occur since the signals are too strong for the logic, In > DM780 in the sound card setting page, did you check the 0db radio button? > > > On my 5000, any setting past -20db removes all signals from the DM780 > waterfall display. > > > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
