I don't know if he is talking about the parameters in the DSP panel or in the VAC panel (the figures are what I use in the VAC panel).
Doesn't 1.8.5 self-set itself to the driver setting anyway? 73 Neal Campbell Abroham Neal Software www.abrohamnealsoftware.com (540) 645 5394 NEW PHONE NUMBER Amateur Radio: K3NC Blog: http://www.abrohamnealsoftware.com/blog/ DXBase bug reports: email to ca...@dxbase.fogbugz.com Abroham Neal forums: http:/www.abrohamnealsoftware.com/community/ On Tue, Mar 30, 2010 at 10:45 PM, Lee - AA5J <a...@centurytel.net> wrote: > Uh, > > Firewire Sample Rate 96kHz > > but > > Powersdr Sample Rate 48000 > > > > > On 3/27/2010 7:57 PM, Drax Felton wrote: > >> I followed the recommended setup for digital modes from this document: >> >> http://kc.flex-radio.com/KnowledgebaseArticle50363.aspx?Keywords=digital+mod >> es >> >> The Firewire driver is set to: >> Buffer Size 1024 >> Sample Rate 96kHz >> >> VAC is set to these for both cables: >> SR 11025..96000 >> BPS 8 to 16 >> NC 1..2 >> Max inst 20 >> MS per int 5 >> Stream fmt Cable Range >> Volume Control: off >> Clock corr% 100.0 >> >> Setup in PowerSDR is: >> Buffer Size 1024 >> Sample Rate 48000 >> Latency 120 >> I have to run the RX Gain at -40 to keep DM780 from complaining about >> overload. >> And HRD still reports Audio 25% to 40% and sometimes jumping to 100% >> >> >> >> -----Original Message----- >> From: Dave Beumer WØDHB [mailto:d...@w0dhb.net] >> Sent: Saturday, March 27, 2010 6:46 PM >> To: 'Drax Felton'; flexradio@flex-radio.biz >> Subject: RE: [Flexradio] OK now PSK31 weirdness >> >> Drax >> >> Does this clear up if you toggle the PowerSDR start button ? >> >> What sample rate,buffer size and mode is the firewire driver set to ? >> Does the sample rate set in PowerSDR match the Driver sample rate ? >> >> Dave >> >> -----Original Message----- >> From: flexradio-boun...@flex-radio.biz >> [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Drax Felton >> Sent: Saturday, March 27, 2010 3:48 PM >> To: flexradio@flex-radio.biz >> Subject: Re: [Flexradio] OK now PSK31 weirdness >> >> >> It looks like it has a lot of extra traces in it. When I click on them I >> cannot decode anything. >> http://www.myresourcegroup.com/DM780-Screenshot-2010-03-27-174130.JPG >> >> >> The DM780 Audio % at the bottom of the screen keeps bouncing from 40% to >> 100% occasionally saying "Overload" and I already have the maximum VAC, RX >> Gain at -40. Could this be the issue? >> >> >> >> _______________________________________________ >> FlexRadio Systems Mailing List >> FlexRadio@flex-radio.biz >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ >> Knowledge Base: http://kc.flex-radio.com/ Homepage: >> http://www.flex-radio.com/ >> >> >> >> > Uh, > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
