Drax,
Best not to get into the calibration menus unless you know what you are
doing and really need to. Check your audio and AGC-T gain levels,
they both have an effect on the audio level going to VAC. You usually
do not need to run the AGC-T gain past 70 or 80 .
73,
Dudley
WA5QPZ
Drax Felton wrote:
Where is the calibration?
Base line noise is around -100dBm
From: Neal Campbell [mailto:nealk...@gmail.com]
Sent: Saturday, March 27, 2010 9:43 PM
To: Drax Felton
Cc: flexradio@flex-radio.biz
Subject: Re: [Flexradio] OK now PSK31 weirdness
Maybe do the rx calibration routine? Sounds like the signal levels are not
calibrated. What level on the PowerSDR panadapter is the baseline noise?
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
_______________________________________________
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/