You can lower the RX gain that is sent over VAC in the VAC tab of the setup window.
On Sun, Mar 28, 2010 at 6:36 AM, Drax Felton <draxfel...@gmail.com> wrote: > > I thought he was referring to HDR calibration. No, I'm not going anyplace > near the Flex calibration! > My AGC-T was set at 90, now 70, but I do have the AGC set as Fixed (off) > because I read someplace that digital modes should be run with fast or AGC > OFF. Does this hold true with the FlexRadio? > > Does the AF control have any effect on the VAC. I wouldn't think so. > > > > > -----Original Message----- > From: Dudley Hurry [mailto:jhu...@austin.rr.com] > Sent: Sunday, March 28, 2010 12:51 AM > To: Drax Felton > Cc: 'Neal Campbell'; flexradio@flex-radio.biz > Subject: Re: [Flexradio] OK now PSK31 weirdness > > Drax, > > Best not to get into the calibration menus unless you know what you are > doing and really need to. Check your audio and AGC-T gain levels, > they both have an effect on the audio level going to VAC. You usually > do not need to run the AGC-T gain past 70 or 80 . > > 73, > Dudley > > WA5QPZ > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flex-radio.com/ Homepage: > http://www.flex-radio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flex-radio.com/ Homepage: http://www.flex-radio.com/
