Interestingly, I spoke to a sales rep at Universal some months ago re my purchase of a Heil 781, suggesting that, with Flex sales flourishing, they might think of identifying the appropriate cables as "Flex compatible." She acted as though I had fallen from a star and landed on my head. So I guess people will continue to scratch their heads over *which *Yaesu cable is *the * Yaesu cable. At least if they shop at Universal, as many of us do.
On Tue, Dec 7, 2010 at 1:17 PM, Bret Mills <bmil...@ecso.com> wrote: > Hi Bradley, > Glad to hear you got it working and isn't it VERY interesting how when you > buy something you expect it to work right out of the Box, BUT this wiring > issue has been around for a VERY long time and you would think they would > come up with a specific FLEX 5000 cable instead of the Yaesu cable or > something they picked up at the Audio Video store that may or may not work > in a RF environment depending on where the cable was assembled. > > Being on the third floor you may have to continue to use the Artificial > Ground which will mean something else to tune when you change bands (Real > pain) If you have a great deal of RF coming back from the feed line then > you > might have to go further then using a Coax Air wound choke, read this > article from W1HIS it is VERY informative and I think will help your > situation. > > http://www.yccc.org/Articles/W1HIS/CommonModeChokesW1HIS2006Apr06.pdf > > I have used these ideas MANY times for my self and to help other's in my > area build chokes to install out by there antenna's and along there feed > line who have had problems with RF getting into the House / shack instead > of > being radiated out of the Antenna. > > Glad you got it figured out and glad I could be a little help. > > 73's > Bret > WX7Y > > > -----Original Message----- > From: flexradio-boun...@flex-radio.biz > [mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Bradley Feldman > Sent: Tuesday, December 07, 2010 9:00 AM > To: flexradio@flex-radio.biz > Subject: Re: [Flexradio] New 5000A User - TX Audio (severe distortion) > Issues > > Here's an update on my progress: > > Per Brett and Gerald, I rewired the Heil Mic cable on the XLR side > distinctly and separately use all three pins of the XLR connector (only 2 > were being used and the shield was tied to the Mic negative). I rewired > the 8 pin side to have both the mic shield and the PTT shield on pin 5. > Mic > pos, Mic neg and PTT on the proper pins per the 5K manual. The 8 pin > connector cover is not attached to anything. > > So far, that seems to have solved the mic audio distortion issue. I'll be > switching to using the rear panel connection later this week. > > As far as RFI, I've temporarily hooked up an MFJ-931 Artificial Ground > (until I can set up a RF suppressor ground in the spring). That seems to > be > working as well. The RF ground current is showing considerably strong on > the unit's meter. > > I will likely put together the "air choke" that Harvey recommended. Seems > easy to construct and I'd think would lessen the necessary work of the > Artificial Ground. > > Many thanks to all who sent suggestions and recommendations. > > KK2QQ > > > > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > > -- > This message has been scanned for viruses and dangerous content by > MailScanner, and is believed to be clean. > > > -- > This message has been scanned for viruses and > dangerous content by MailScanner, and is > believed to be clean. > > > _______________________________________________ > FlexRadio Systems Mailing List > FlexRadio@flex-radio.biz > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/
