Steve, See below.
Gerald Gerald Youngblood, K5SDR President and CEO FlexRadio Systems(TM) 13091 Pond Springs Road, #250 Austin, TX 78729 Phone: 512-535-4713 Ext. 202 Email: ger...@flexradio.com Web: www.flexradio.com <http://www.flex-radio.com/> Tune In Excitement (TM) PowerSDR(TM) is a trademark of FlexRadio Systems On Thu, Mar 3, 2011 at 9:02 AM, Jim <pywac...@insightbb.com> wrote: > Easy Ssb peaks equal & never exceed the drive setting. If drive is set to > 40 watts Ssb peak setting reaches but never exceeds 40 watts. > I am not sure I understand what you are talking about here. What is Easy Ssb > > Easy experiment in test section set > To 40 watts engage two tone & it will be above 40. It may surprise you how > much. If using Compression note the difference between CPDR & DX. > This sounds perfectly normal. PEP will be 6 dB above the single tone level on two tone testing. > > > > Sent from the land of OZ > > > On Mar 3, 2011, at 9:20 AM, Gerald Youngblood <ger...@flexradio.com> > wrote: > > > Steve, et. al. > > > > We significantly decreased TR transition times in firmware in order to > > deliver the major CW timing improvements in 2.0.19 RC1. It sounds like > we > > need to take another look to see if that speed improvement is causing a > > transition glitch on voice modes. I will meet with the engineering team > to > > discuss a test and resolution methodology. > > > > We will probably want to get a small group of testers to help get to the > > bottom of the problem without taking up too much reflector bandwidth. If > > you or others who have good test setups would like to help, please send > me a > > private email. > > > > Thanks, > > Gerald > > > > > > Gerald Youngblood, K5SDR > > President and CEO > > FlexRadio Systems(TM) > > 13091 Pond Springs Road, #250 > > Austin, TX 78729 > > Phone: 512-535-4713 Ext. 202 > > Email: ger...@flexradio.com > > Web: www.flexradio.com <http://www.flex-radio.com/> > > > > Tune In Excitement (TM) > > > > PowerSDR(TM) is a trademark of FlexRadio Systems > > > > > > On Wed, Mar 2, 2011 at 3:37 PM, Steve Tripp (K1IIG-1) < > > stephen.tr...@snet.net> wrote: > > > >> Using my FK5 has frequently causes my Acom2000a to false off. It first > >> occurred when running 1000w in USB but now is happening more frequently > >> with USB carefully adjusted so ALC never peaks 0 dbm and the same with > the > >> leveler. I can easily duplicate this problem when in the tune position, > >> whereby the amp ALWAYS drops out when tune drive power is 25w or more > and > >> even when tune power is down to 10w. I normally have the tune set to > 10w. > >> Please note, I have NEVER dropped the amp using CW driving the ACOM to > full > >> 1500w with harsh testing. None of my other transceivers, including my > >> PRO3, have ever caused the amp to drop out in any mode. Because the amp > >> consistently drops out when releasing the tune, I wonder if the Flex is > >> sending a full power spike to the amp causing a drop out. The amp NEVER > >> dropping out in CW confuses the issue. > >> > >> Finally, I have had a 3000 and now the 5000 e/w V/U and never > experienced > >> this or other problems while the 3000 was running version 1.18. I am not > >> convinced the Flex 5000 is a reliable radio. This is my first post and > do > >> not consider myself a whiner but indeed I have struggled with the Flex > 5000. > >> > >> Steve > >> K1IIG > >> _______________________________________________ > >> FlexRadio Systems Mailing List > >> FlexRadio@flex-radio.biz > >> http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > >> Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > >> Knowledge Base: http://kc.flexradio.com/ Homepage: > >> http://www.flexradio.com/ > >> > > _______________________________________________ > > FlexRadio Systems Mailing List > > FlexRadio@flex-radio.biz > > http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz > > Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ > > Knowledge Base: http://kc.flexradio.com/ Homepage: > http://www.flexradio.com/ > _______________________________________________ FlexRadio Systems Mailing List FlexRadio@flex-radio.biz http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/ Knowledge Base: http://kc.flexradio.com/ Homepage: http://www.flexradio.com/