中治さま、よろしくお願いします。 2010-02-20 (土) の 16:06 +0900 に NAKAJI Hiroyuki さんは書きました: > pc98ユーザの中治です。 > > X以前に、FreeBSD(98) 6.4Rはいささか古いので、FreeBSD/pc98 7.2-RELEASEか、 > まもなくリリースされるであろう FreeBSD/pc98 7.3-RELEASE を試してみるのもよ > いと思います。
僕は、ユーザ歴があまりないので、また、コンピュータ歴も短いので、FreeBSD と限らず、パソコンに疎く、また、開発能力もない、一般ユーザの一人として、 見ていただければ幸いです。実は、よくわからなく、わざと、もっとも、古い ヴァージョンを選択したのです。確か、FreeBSD8xになってしまうと、SCSIカー ド自体、認識しなかったかと、もう、サポート外だった、と、思いました。ちな みに、差してるSCSIボードは、 PC-9801-100 です。これだと、PC-9801-100は、 認識されなかったと、記憶しているのですが、間違いであっとしたら、ごめんな さい。 > > おそらく、pc98でXFree86が動くとすれば、それはXFree86 3.xxまでです。 > XFree86 4.xxはまず無理だと思った方が心の平穏を保つことができます。 > そうなんですか。無理ですか・・・。では、再フォーマットかもしれません。 > では、Xorgはどうかといえば、xorg-7.4のXサーバは、使えるビデオカードがとて > も限られていて、pc98で入手可能なPCIカードの大半は、今のところ、バツです。 > > ところで、お使いになっているpc98の機種とXサーバを使いたいVGA chipは何です > か? > > ・機種 PC-9821Ra43Yz と言う機種です。フロッピードライブを改造して、3.5inch ドラ イブを2基持っています。それと、外づけで、5inch ドライブも2基あります。 http://www.pasocomclub.co.jp/datas/nec_pc_9821ra43.html と同じグラフィックアクセレータです。 > ・/var/run/dmesg.boot Copyright (c) 1992-2008 The FreeBSD Project. Copyright (c) 1994-2003 FreeBSD(98) porting team. Copyright (c) 1992 A.Kojima F.Ukai M.Ishii (KMC). Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.4-RELEASE #6: Wed Jan 20 14:22:59 JST 2010 r...@chacha:/usr/src/sys/pc98/compile/MYCOM Timecounter "i8254" frequency 2457600 Hz quality 0 CPU: Pentium II/Pentium II Xeon/Celeron (432.79-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0x665 Stepping = 5 Features=0x183f9ff<FPU,VME,DE,PSE,TSC,MSR,PAE,MCE,CX8,SEP,MTRR,PGE,MCA,CMOV,PAT,PSE36,MMX,FXSR> real memory = 100663296 (96 MB) avail memory = 91811840 (87 MB) cpu0 on motherboard pcib0: <Host to PCI bridge> pcibus 0 on motherboard pci0: <PCI bus> on pcib0 Correcting Natoma config for SMP isab0: <PCI-ISA bridge> at device 6.0 on pci0 isa0: <ISA bus> on isab0 pci0: <display> at device 7.0 (no driver attached) pci0: <display, VGA> at device 8.0 (no driver attached) fxp0: <Intel 82557 Pro/100 Ethernet> port 0x6000-0x601f mem 0x20410000-0x20410fff,0x20500000-0x205fffff irq 6 at device 11.0 on pci0 miibus0: <MII bus> on fxp0 nsphy0: <DP83840 10/100 media interface> on miibus0 nsphy0: 10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto fxp0: Ethernet address: 00:00:4c:2d:ae:82 atacbus0 at port 0x640-0x64f,0x74c,0x432 irq 9 on isa0 ata0 at bank 0 on atacbus0 ata1 at bank 1 on atacbus0 fdc0 at port 0x90,0x92,0x94,0xbe,0x4be irq 11 drq 2 on isa0 fd0: <1.44M FDD> on fdc0 drive 0 fd1: <1.44M FDD> on fdc0 drive 1 fd2: <1M/640K FDD> on fdc0 drive 2 fd3: <1M/640K FDD> on fdc0 drive 3 gdc0: <Generic GDC> at port 0x60,0x62,0x64,0x66,0x68,0x6a,0x6c,0x6e,0xa0,0xa2,0xa4,0xa6,0xa8,0xaa,0xac,0xae,0x4a0,0x4a2,0x4a4,0x4a6,0x4a8,0x4aa,0x4ac,0x4ae,0x9a0,0x9a2,0x9a4,0x9a6,0x9a8,0x9aa,0x9ac,0x9ae,0x70,0x72,0x74,0x76,0x78,0x7a,0x7c,0x7e,0xa1,0xa3,0xa5,0xa7,0xa9,0xab,0xad,0xaf iomem 0xa0000-0xa4fff,0xa8000-0xbffff,0xe0000-0xe7fff on isa0 mse0: <Bus/InPort Mouse> at port 0x7fd9,0x7fdb,0x7fdd,0x7fdf irq 13 on isa0 pckbd0: <PC-98 Keyboard> at port 0x41,0x43 irq 1 on isa0 kbd0 at pckbd0 ppc0: <Parallel port> at port 0x140-0x147 irq 14 on isa0 ppc0: SMC-like chipset (ECP/EPP/PS2/NIBBLE) in COMPATIBLE mode ppc0: FIFO with 16/16/16 bytes threshold ppbus0: <Parallel port bus> on ppc0 plip0: <PLIP network interface> on ppbus0 lpt0: <Printer> on ppbus0 lpt0: Interrupt-driven port ppi0: <Parallel I/O> on ppbus0 sc0: <System console> on isa0 sc0: PC-98x1 <16 virtual consoles, flags=0x200> sio0 at port 0x30 irq 4 on isa0 sio0: type (internal fifo v-fast) sio1: configured irq 5 not in bitmap of probed irqs 0 sio1: port may not be enabled unknown: <PNP0303> can't assign resources (port) unknown: <NEC1f00> can't assign resources (port) unknown: <NEC1902> can't assign resources (memory) unknown: <PNP0600> can't assign resources (port) unknown: <PNP0c01> can't assign resources (memory) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <PNP0c02> can't assign resources (port) unknown: <NEC1401> can't assign resources (port) unknown: <PNP0700> can't assign resources (port) unknown: <NEC1502> can't assign resources (port) aic1: <Adaptec 6260/6360 SCSI controller> at port 0x1840,0x1842,0x1844,0x1846,0x1848,0x184a,0x184c,0x184e,0x1850,0x1852,0x1854,0x1856,0x1858,0x185a,0x185c,0x185e,0x1860,0x1862,0x1864,0x1866,0x1868,0x186a,0x186c,0x186e,0x1870,0x1872,0x1874,0x1876,0x1878,0x187a,0x187c,0x187e iomem 0xd0000-0xd3fff irq 3 on isa0 aic1: AIC6360, disconnection, fast SCSI aic1: [GIANT-LOCKED] Timecounter "TSC" frequency 432787063 Hz quality 800 Timecounters tick every 1.000 msec ad0: 8063MB <NEC D5PA-305008 TWDPA60A> at ata0-master PIO4 acd0: CDROM <NEC CD-ROM DRIVE:28G/3.35> at ata1-master PIO4 Waiting 5 seconds for SCSI devices to settle da1 at aic1 bus 0 target 1 lun 0 da1: <MELCO DSC-UE8.3G 1.05> Fixed Direct Access SCSI-2 device da1: 10.000MB/s transfers (10.000MHz, offset 8) da1: 8010MB (16405632 512 byte sectors: 8H 32S/T 64083C) da2 at aic1 bus 0 target 2 lun 0 da2: <NECITSU M2512A 1507> Removable Optical SCSI-2 device da2: 5.000MB/s transfers (5.000MHz, offset 8) da2: 121MB (248826 512 byte sectors: 64H 32S/T 121C) da0 at aic1 bus 0 target 0 lun 0 da0: <SEAGATE ST32151N 0530> Fixed Direct Access SCSI-2 device da0: 10.000MB/s transfers (10.000MHz, offset 8), Tagged Queueing Enabled da0: 2049MB (4197405 512 byte sectors: 8H 32S/T 16395C) Trying to mount root from ufs:/dev/da1s1a > ・pciconf -lv の出力 Script started on Sat Feb 20 18:24:52 2010 You have mail. chacha# pciconf -lv hos...@pci0:0:0: class=0x060000 card=0x00000000 chip=0x12378086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82440/1FX 440FX (Natoma) System Controller' class = bridge subclass = HOST-PCI is...@pci0:6:0: class=0x068000 card=0x00000000 chip=0x002c1033 rev=0x01 hdr=0x00 vendor = 'NEC Electronics Hong Kong' class = bridge no...@pci0:7:0: class=0x038000 card=0x00000000 chip=0x00091033 rev=0x03 hdr=0x00 vendor = 'NEC Electronics Hong Kong' device = 'GUI Accelerator for 98' class = display no...@pci0:8:0: class=0x030000 card=0x00000000 chip=0x96601023 rev=0xd3 hdr=0x00 vendor = 'Trident Microsystems' device = 'TGUI9660XGi/968x/938x GUI Accelerator' class = display subclass = VGA f...@pci0:11:0: class=0x020000 card=0x80001033 chip=0x12298086 rev=0x02 hdr=0x00 vendor = 'Intel Corporation' device = '82550/1/7/8/9 EtherExpress PRO/100(B) Ethernet Adapter' class = network subclass = ethernet chacha# exit exit Script done on Sat Feb 20 18:25:09 2010 > > などがあると、わかりやすいです。 > > ちなみに、うちのPC-9821Ra333にはミレニアムをつけていて、pciconfでは > > vgap...@pci0:0:13:0: class=0x038000 card=0x00000000 chip=0x0519102b > rev=0x01 hdr=0x00 > vendor = 'Matrox Electronic Systems Ltd.' > device = 'MGA-2064W Storm (Millennium board)' > class = display > > という具合いに認識されます。 はい。中治さま、よろしくお願いします。m(__)m