Hi Dave et al Just to let you know that v3 has been uploaded into the SM1000 and I am on air on a daily basis at 1600hrs (local time) utc on 3693MHz where there is a daily net on at that time using 700D. All good. Please join us. Thanks, Eric GW8LJJ
Sent from my iPad > On 14 Mar 2020, at 06:59, David Rowe <[email protected]> wrote: > > Can anyone please tell me if they have tested this firmware over the air? > > Pls email me direct if the mailing list is causing problems - one > gentlemen said his email didn't get through to the list. > > Thanks, > David > > >> On 9/3/20 7:07 am, David Rowe wrote: >> Hello List, >> >> A few months ago Mal, VK8MT, spotted a few bugs in the SM1000 user >> interface. I have had a go at fixing them, integrating the latest 700D >> modem tweaks, and adding the automatic microphone equaliser: >> >> https://github.com/drowe67/codec2/pull/58 >> >> I've also tweaked the doco, adding links to the V3 binaries, and fixing >> a glitch in the example wiring diagram: >> >> https://github.com/drowe67/codec2/blob/dr-sm1000-tweaks/stm32/doc/sm1000_manual.md >> >> If you are interested, please try it out over the air and let me know >> how it goes. >> >> http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.bin >> http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.dfu >> >> On power on you should hear 'V3' in morse, followed by the current mode >> (ANA for analog if it's a fresh reflash). >> >> Thanks, >> David >> >> >> _______________________________________________ >> Freetel-codec2 mailing list >> [email protected] >> https://lists.sourceforge.net/lists/listinfo/freetel-codec2 >> > > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
