David, I have tested it "over the air" between two radios in the shack (ICOM and FLEX) and worked OK. Hope to get on the air if these localized storms (beginning to look like spring around here!) allow.
Mel, K0PFX St Louis -----Original Message----- From: David Rowe <[email protected]> Sent: Saturday, March 14, 2020 1:58 AM To: [email protected] Subject: Re: [Freetel-codec2] SM1000 v3 firmware Can anyone please tell me if they have tested this firmware over the air? Pls email me direct if the mailing list is causing problems - one gentlemen said his email didn't get through to the list. Thanks, David On 9/3/20 7:07 am, David Rowe wrote: > Hello List, > > A few months ago Mal, VK8MT, spotted a few bugs in the SM1000 user > interface. I have had a go at fixing them, integrating the latest 700D > modem tweaks, and adding the automatic microphone equaliser: > > https://github.com/drowe67/codec2/pull/58 > > I've also tweaked the doco, adding links to the V3 binaries, and > fixing a glitch in the example wiring diagram: > > https://github.com/drowe67/codec2/blob/dr-sm1000-tweaks/stm32/doc/sm10 > 00_manual.md > > If you are interested, please try it out over the air and let me know > how it goes. > > http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.bin > http://www.rowetel.com/downloads/codec2/smartmic/sm1000v3.dfu > > On power on you should hear 'V3' in morse, followed by the current > mode (ANA for analog if it's a fresh reflash). > > Thanks, > David > > > _______________________________________________ > Freetel-codec2 mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/freetel-codec2 > _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2 _______________________________________________ Freetel-codec2 mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freetel-codec2
