Michel Hoogervorst wrote:
> This should work indeed...
>
> Maybe you can try to run mplayer from the command line yourself, to
> check if TV works at all.  Try something like:
>
> $ mplayer tv:// -tv driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=155
>
> And see if that works at all?
>
>
> Michel
>
> 2007/6/25, Yugandhar G.V <[EMAIL PROTECTED]>:
>   
>> Hi john,
>>      I will explain you what I have done.
>>         I have the changed the file freevo.conf which you can see below
>>         cdparanoia = /usr/bin/cdparanoia
>>         chanlist = india
>>         display = x11
>>         flac = /usr/bin/flac
>>         geometry = 800x600
>>         jpegtran = /usr/local/bin/jpegtran
>>         lame = /usr/local/bin/lame
>>         lsdvd = /usr/bin/lsdvd
>>         mencoder = /usr/local/bin/mencoder
>>         mplayer = /usr/local/bin/mplayer
>>         oggenc = /usr/bin/oggenc
>>         renice = /usr/bin/renice
>>         setterm = /usr/bin/setterm
>>         tv = pal
>>         tvtime = /usr/bin/tvtime
>>         version = 2.1
>>         and I have changed the local_conf.py file which contains list of
>> channels which u can see below
>>         TV_CHANNELS = [('2', 'DD National',              '1'),
>>                 ('3', 'DD Hindi',              '3'),
>>                 ('4', 'DD SPorts',               '4') ]
>>         Which has the frequencies in freq.py file which is shown below
>>         PAL_INDIA = [
>>     ( "1", 188600 ),
>>     ( "2", 188300 ),
>>     ( "3", 188400 ),
>>     ( "4", 188500 ),
>>     ( "5", 155000 ),
>>     ( "6", 191000 ),
>>     ( "7", 144000 ),
>>     ( "8", 150000 ),
>> ]
>>
>>
>> CHANLIST = {
>>      "us-bcast"         : dict(NTSC_BCAST),
>>      "us-cable"         : dict(NTSC_CABLE),
>>      "us-cable-hrc"     : dict(NTSC_HRC),
>>      "japan-bcast"      : dict(NTSC_BCAST_JP),
>>      "japan-cable"      : dict(NTSC_CABLE_JP),
>>      "europe-west"      : dict(PAL_EUROPE),
>>      "europe-east"      : dict(PAL_EUROPE_EAST),
>>      "italy"            : dict(PAL_ITALY),
>>      "newzealand"       : dict(PAL_NEWZEALAND),
>>      "australia"        : dict(PAL_AUSTRALIA),
>>      "ireland"          : dict(PAL_IRELAND),
>>      "france"           : dict(SECAM_FRANCE),
>>      "china-bcast"      : dict(PAL_CHINA),
>>      "canada-cable"     : dict(NTSC_CABLE_CAN),
>>      "southafrica"      : dict(PAL_BCAST_ZA),
>>      "argentina"        : dict(ARGENTINA),
>>      "india"            : dict(PAL_INDIA),
>>
>> }
>>         I have the done above changes to the corresponding files and started
>> freevo application. Once the applications shows the menu I enter into watch
>> TV and then to TV guide which shows my list of channels with channels has no
>> data loaded and enter to a particular channel it is not showing me the TV.
>> Is this the right way to play the TV even if my TV guide is not working. Let
>> me know anything wrong I have done.
>>
>> Regards,
>> Yugandhar
>>     
Hi Yungandhar,

That all looks good so far.As Michel suggests it would be a good idea to 
test it's working from the command line. What tv plugin are you using, 
mplayer, tvtime? After that turn have a look at your log files probably 
/var/log/freevo/main-x.log and see what command freevo tries to use to 
play tv. Copy and paste this to the command line and see what's 
happening there.

John

>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of John
>> Molohan
>> Sent: Friday, June 22, 2007 7:29 PM
>> To: [email protected]
>> Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has no
>> data loaded)
>>
>> Yugandhar G.V wrote:
>>     
>>> Hi all,
>>>
>>>       
>> Hi.
>>     
>>> I have an Hauppauge card PVR-350 and installed the ivtv driver for the
>>> card on my fedora core 4 pc. I have tested the card for both FM Radio
>>> and TV by manually setting the frequencies of the card. Everything is
>>> working fine.
>>>
>>> I have installed freevo application which supports the Hauppauge card
>>> PVR-350 and configured the freevo to use my Hauppauge card. Freevo
>>> which uses frequencies from freq.py file doesn't have the frequency
>>> list for india and one of the member of freevo users list Michel who
>>> has given me the advice to change the freq.py and edit your country
>>> frequencies. I have done that but still my TV guide is not showing
>>> anything it is showing Channel has not data loaded.
>>>
>>> Can anyone in the list help me how can I fully configure and edit the
>>> frequencies for India and make it.
>>>
>>> Regards,
>>>
>>> Yugandhar.h
>>>
>>>       
>> Watching TV and having program information show up in the TV Guide are
>> two separate issues and one does not require the other. What I mean from
>> this is that if you have you're tv channels correctly defined in
>> local_conf.py (and in your case freq.py as they weren't included with
>> that) you can go into the tv guide and even if it shows 'channel has no
>> data loaded' you should still be able to hit play and that tv channel
>> should start playing. If this is not working please let us know.
>>
>> To get a tv guide working with program info so you see data on the tv
>> shows that are on and do not get the 'channel has no data loaded'
>> message you need to have a source configured that provides a xml file
>> for freevo with this information. In Ireland I do this using the package
>> xmltv. I configure this separately to freevo to download information on
>> all the channels I receive and it stores this in a file I specify - in
>> my case /tmp/TV.xml (as this is where freevo looks for this information
>> by default). xmltv has different sources for getting this data, for
>> example my data is taken by xmltv from the BBC in England. It downloads
>> a file they make freely available on their website with all the tv guide
>> information. xmltv used similar sources in different countries depending
>> on whether you are in Ireland or England or Germany etc. The real issue
>> here is I don't know if there is a xmltv grabber (as they are called)
>> for India, you will need to find this out. If there is not you should
>> still be able to view tv just without any guide information.
>>
>> If freevo has access to a TV.xml file it will load the information that
>> it finds in it that matches the channels you specify in your
>> local_conf.py. I hope this might in some way clear things up for you,
>> let us know how you get on.
>>
>> John
>>
>>     


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to