Duncan Webb wrote:
> -----BEGIN PGP SIGNED MESSAGE-----
> Hash: SHA1
>
> John Molohan wrote:
>
>> Michel Hoogervorst wrote:
>>
>>> This should work indeed...
>>>
>>> Maybe you can try to run mplayer from the command line yourself, to
>>> check if TV works at all. Try something like:
>>>
>>> $ mplayer tv:// -tv driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=155
>>>
>>> And see if that works at all?
>>>
>>>
>>> Michel
>>>
>>> 2007/6/25, Yugandhar G.V <[EMAIL PROTECTED]>:
>>>
>>>
>>>> Hi john,
>>>> I will explain you what I have done.
>>>> I have the changed the file freevo.conf which you can see below
>>>> cdparanoia = /usr/bin/cdparanoia
>>>> chanlist = india
>>>> display = x11
>>>> flac = /usr/bin/flac
>>>> geometry = 800x600
>>>> jpegtran = /usr/local/bin/jpegtran
>>>> lame = /usr/local/bin/lame
>>>> lsdvd = /usr/bin/lsdvd
>>>> mencoder = /usr/local/bin/mencoder
>>>> mplayer = /usr/local/bin/mplayer
>>>> oggenc = /usr/bin/oggenc
>>>> renice = /usr/bin/renice
>>>> setterm = /usr/bin/setterm
>>>> tv = pal
>>>> tvtime = /usr/bin/tvtime
>>>> version = 2.1
>>>> and I have changed the local_conf.py file which contains list of
>>>> channels which u can see below
>>>> TV_CHANNELS = [('2', 'DD National', '1'),
>>>> ('3', 'DD Hindi', '3'),
>>>> ('4', 'DD SPorts', '4') ]
>>>> Which has the frequencies in freq.py file which is shown below
>>>> PAL_INDIA = [
>>>> ( "1", 188600 ),
>>>> ( "2", 188300 ),
>>>> ( "3", 188400 ),
>>>> ( "4", 188500 ),
>>>> ( "5", 155000 ),
>>>> ( "6", 191000 ),
>>>> ( "7", 144000 ),
>>>> ( "8", 150000 ),
>>>> ]
>>>>
>>>>
>>>> CHANLIST = {
>>>> "us-bcast" : dict(NTSC_BCAST),
>>>> "us-cable" : dict(NTSC_CABLE),
>>>> "us-cable-hrc" : dict(NTSC_HRC),
>>>> "japan-bcast" : dict(NTSC_BCAST_JP),
>>>> "japan-cable" : dict(NTSC_CABLE_JP),
>>>> "europe-west" : dict(PAL_EUROPE),
>>>> "europe-east" : dict(PAL_EUROPE_EAST),
>>>> "italy" : dict(PAL_ITALY),
>>>> "newzealand" : dict(PAL_NEWZEALAND),
>>>> "australia" : dict(PAL_AUSTRALIA),
>>>> "ireland" : dict(PAL_IRELAND),
>>>> "france" : dict(SECAM_FRANCE),
>>>> "china-bcast" : dict(PAL_CHINA),
>>>> "canada-cable" : dict(NTSC_CABLE_CAN),
>>>> "southafrica" : dict(PAL_BCAST_ZA),
>>>> "argentina" : dict(ARGENTINA),
>>>> "india" : dict(PAL_INDIA),
>>>>
>>>> }
>>>> I have the done above changes to the corresponding files and
>>>> started
>>>> freevo application. Once the applications shows the menu I enter into watch
>>>> TV and then to TV guide which shows my list of channels with channels has
>>>> no
>>>> data loaded and enter to a particular channel it is not showing me the TV.
>>>> Is this the right way to play the TV even if my TV guide is not working.
>>>> Let
>>>> me know anything wrong I have done.
>>>>
>>>> Regards,
>>>> Yugandhar
>>>>
>>>>
>> Hi Yungandhar,
>>
>> That all looks good so far.As Michel suggests it would be a good idea to
>> test it's working from the command line. What tv plugin are you using,
>> mplayer, tvtime? After that turn have a look at your log files probably
>> /var/log/freevo/main-x.log and see what command freevo tries to use to
>> play tv. Copy and paste this to the command line and see what's
>> happening there.
>>
>>
>
> Another way to do this is in local_conf.py include:
> TV_CHANNELS = [
> ('2', 'DD National', '1'),
> ('3', 'DD Hindi', '3'),
> ('4', 'DD SPorts', '4'),
> ]
>
> FREQUENCY_TABLE = {
> "1", 188600,
> "2", 188300,
> "3", 188400,
> "4", 188500,
> }
>
> The names '2', '3', '4' in the first column of TV_CHANNELS need to be
> the same as your xmltv guide.
>
> Duncan
>
Very true and probably much easier for a noob. I wanted to encourage the
other route in order to get a patch for freq.py (plus he was already
going down this route). It just means that in future we will have more
locations supported by default.
John
>
>>>> -----Original Message-----
>>>> From: [EMAIL PROTECTED]
>>>> [mailto:[EMAIL PROTECTED] On Behalf Of John
>>>> Molohan
>>>> Sent: Friday, June 22, 2007 7:29 PM
>>>> To: [email protected]
>>>> Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has no
>>>> data loaded)
>>>>
>>>> Yugandhar G.V wrote:
>>>>
>>>>
>>>>> Hi all,
>>>>>
>>>>>
>>>>>
>>>> Hi.
>>>>
>>>>
>>>>> I have an Hauppauge card PVR-350 and installed the ivtv driver for the
>>>>> card on my fedora core 4 pc. I have tested the card for both FM Radio
>>>>> and TV by manually setting the frequencies of the card. Everything is
>>>>> working fine.
>>>>>
>>>>> I have installed freevo application which supports the Hauppauge card
>>>>> PVR-350 and configured the freevo to use my Hauppauge card. Freevo
>>>>> which uses frequencies from freq.py file doesn't have the frequency
>>>>> list for india and one of the member of freevo users list Michel who
>>>>> has given me the advice to change the freq.py and edit your country
>>>>> frequencies. I have done that but still my TV guide is not showing
>>>>> anything it is showing Channel has not data loaded.
>>>>>
>>>>> Can anyone in the list help me how can I fully configure and edit the
>>>>> frequencies for India and make it.
>>>>>
>>>>> Regards,
>>>>>
>>>>> Yugandhar.h
>>>>>
>>>>>
>>>>>
>>>> Watching TV and having program information show up in the TV Guide are
>>>> two separate issues and one does not require the other. What I mean from
>>>> this is that if you have you're tv channels correctly defined in
>>>> local_conf.py (and in your case freq.py as they weren't included with
>>>> that) you can go into the tv guide and even if it shows 'channel has no
>>>> data loaded' you should still be able to hit play and that tv channel
>>>> should start playing. If this is not working please let us know.
>>>>
>>>> To get a tv guide working with program info so you see data on the tv
>>>> shows that are on and do not get the 'channel has no data loaded'
>>>> message you need to have a source configured that provides a xml file
>>>> for freevo with this information. In Ireland I do this using the package
>>>> xmltv. I configure this separately to freevo to download information on
>>>> all the channels I receive and it stores this in a file I specify - in
>>>> my case /tmp/TV.xml (as this is where freevo looks for this information
>>>> by default). xmltv has different sources for getting this data, for
>>>> example my data is taken by xmltv from the BBC in England. It downloads
>>>> a file they make freely available on their website with all the tv guide
>>>> information. xmltv used similar sources in different countries depending
>>>> on whether you are in Ireland or England or Germany etc. The real issue
>>>> here is I don't know if there is a xmltv grabber (as they are called)
>>>> for India, you will need to find this out. If there is not you should
>>>> still be able to view tv just without any guide information.
>>>>
>>>> If freevo has access to a TV.xml file it will load the information that
>>>> it finds in it that matches the channels you specify in your
>>>> local_conf.py. I hope this might in some way clear things up for you,
>>>> let us know how you get on.
>>>>
> -----BEGIN PGP SIGNATURE-----
> Version: GnuPG v1.4.7 (GNU/Linux)
> Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
>
> iD8DBQFGf+6yNi6l+Xvys44RAubvAJ4uJei4hSEphLpdwMXbvaDAQouxsgCfcMfZ
> zLhykCl+0EAJIWGEz6HGUMY=
> =BNeA
> -----END PGP SIGNATURE-----
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users