Hi john,
         I have tried running the mplayer from the command line as follows
        $ mplayer tv:// -tv
driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=188.3
        My mplayer is getting crashed. I am sending the output of the
command in textline can you tell me what's being happened.
        But when I capture the video from the card and store it in a file
and plays it using mplayer is working.
        Cat /dev/video0 > test.mpg &
        Mplayer test.mpg it is working fine and I can able to watch the tv.

Regards,
Yugandhar.

-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of John
Molohan
Sent: Monday, June 25, 2007 1:38 PM
To: [email protected]
Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has no
data loaded)

Michel Hoogervorst wrote:
> This should work indeed...
>
> Maybe you can try to run mplayer from the command line yourself, to
> check if TV works at all.  Try something like:
>
> $ mplayer tv:// -tv
driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=155
>
> And see if that works at all?
>
>
> Michel
>
> 2007/6/25, Yugandhar G.V <[EMAIL PROTECTED]>:
>   
>> Hi john,
>>      I will explain you what I have done.
>>         I have the changed the file freevo.conf which you can see below
>>         cdparanoia = /usr/bin/cdparanoia
>>         chanlist = india
>>         display = x11
>>         flac = /usr/bin/flac
>>         geometry = 800x600
>>         jpegtran = /usr/local/bin/jpegtran
>>         lame = /usr/local/bin/lame
>>         lsdvd = /usr/bin/lsdvd
>>         mencoder = /usr/local/bin/mencoder
>>         mplayer = /usr/local/bin/mplayer
>>         oggenc = /usr/bin/oggenc
>>         renice = /usr/bin/renice
>>         setterm = /usr/bin/setterm
>>         tv = pal
>>         tvtime = /usr/bin/tvtime
>>         version = 2.1
>>         and I have changed the local_conf.py file which contains list of
>> channels which u can see below
>>         TV_CHANNELS = [('2', 'DD National',              '1'),
>>                 ('3', 'DD Hindi',              '3'),
>>                 ('4', 'DD SPorts',               '4') ]
>>         Which has the frequencies in freq.py file which is shown below
>>         PAL_INDIA = [
>>     ( "1", 188600 ),
>>     ( "2", 188300 ),
>>     ( "3", 188400 ),
>>     ( "4", 188500 ),
>>     ( "5", 155000 ),
>>     ( "6", 191000 ),
>>     ( "7", 144000 ),
>>     ( "8", 150000 ),
>> ]
>>
>>
>> CHANLIST = {
>>      "us-bcast"         : dict(NTSC_BCAST),
>>      "us-cable"         : dict(NTSC_CABLE),
>>      "us-cable-hrc"     : dict(NTSC_HRC),
>>      "japan-bcast"      : dict(NTSC_BCAST_JP),
>>      "japan-cable"      : dict(NTSC_CABLE_JP),
>>      "europe-west"      : dict(PAL_EUROPE),
>>      "europe-east"      : dict(PAL_EUROPE_EAST),
>>      "italy"            : dict(PAL_ITALY),
>>      "newzealand"       : dict(PAL_NEWZEALAND),
>>      "australia"        : dict(PAL_AUSTRALIA),
>>      "ireland"          : dict(PAL_IRELAND),
>>      "france"           : dict(SECAM_FRANCE),
>>      "china-bcast"      : dict(PAL_CHINA),
>>      "canada-cable"     : dict(NTSC_CABLE_CAN),
>>      "southafrica"      : dict(PAL_BCAST_ZA),
>>      "argentina"        : dict(ARGENTINA),
>>      "india"            : dict(PAL_INDIA),
>>
>> }
>>         I have the done above changes to the corresponding files and
started
>> freevo application. Once the applications shows the menu I enter into
watch
>> TV and then to TV guide which shows my list of channels with channels has
no
>> data loaded and enter to a particular channel it is not showing me the
TV.
>> Is this the right way to play the TV even if my TV guide is not working.
Let
>> me know anything wrong I have done.
>>
>> Regards,
>> Yugandhar
>>     
Hi Yungandhar,

That all looks good so far.As Michel suggests it would be a good idea to 
test it's working from the command line. What tv plugin are you using, 
mplayer, tvtime? After that turn have a look at your log files probably 
/var/log/freevo/main-x.log and see what command freevo tries to use to 
play tv. Copy and paste this to the command line and see what's 
happening there.

John

>> -----Original Message-----
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of John
>> Molohan
>> Sent: Friday, June 22, 2007 7:29 PM
>> To: [email protected]
>> Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has
no
>> data loaded)
>>
>> Yugandhar G.V wrote:
>>     
>>> Hi all,
>>>
>>>       
>> Hi.
>>     
>>> I have an Hauppauge card PVR-350 and installed the ivtv driver for the
>>> card on my fedora core 4 pc. I have tested the card for both FM Radio
>>> and TV by manually setting the frequencies of the card. Everything is
>>> working fine.
>>>
>>> I have installed freevo application which supports the Hauppauge card
>>> PVR-350 and configured the freevo to use my Hauppauge card. Freevo
>>> which uses frequencies from freq.py file doesn't have the frequency
>>> list for india and one of the member of freevo users list Michel who
>>> has given me the advice to change the freq.py and edit your country
>>> frequencies. I have done that but still my TV guide is not showing
>>> anything it is showing Channel has not data loaded.
>>>
>>> Can anyone in the list help me how can I fully configure and edit the
>>> frequencies for India and make it.
>>>
>>> Regards,
>>>
>>> Yugandhar.h
>>>
>>>       
>> Watching TV and having program information show up in the TV Guide are
>> two separate issues and one does not require the other. What I mean from
>> this is that if you have you're tv channels correctly defined in
>> local_conf.py (and in your case freq.py as they weren't included with
>> that) you can go into the tv guide and even if it shows 'channel has no
>> data loaded' you should still be able to hit play and that tv channel
>> should start playing. If this is not working please let us know.
>>
>> To get a tv guide working with program info so you see data on the tv
>> shows that are on and do not get the 'channel has no data loaded'
>> message you need to have a source configured that provides a xml file
>> for freevo with this information. In Ireland I do this using the package
>> xmltv. I configure this separately to freevo to download information on
>> all the channels I receive and it stores this in a file I specify - in
>> my case /tmp/TV.xml (as this is where freevo looks for this information
>> by default). xmltv has different sources for getting this data, for
>> example my data is taken by xmltv from the BBC in England. It downloads
>> a file they make freely available on their website with all the tv guide
>> information. xmltv used similar sources in different countries depending
>> on whether you are in Ireland or England or Germany etc. The real issue
>> here is I don't know if there is a xmltv grabber (as they are called)
>> for India, you will need to find this out. If there is not you should
>> still be able to view tv just without any guide information.
>>
>> If freevo has access to a TV.xml file it will load the information that
>> it finds in it that matches the channels you specify in your
>> local_conf.py. I hope this might in some way clear things up for you,
>> let us know how you get on.
>>
>> John
>>
>>     


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users
MPlayer 1.0rc1-4.0.0 (C) 2000-2006 MPlayer Team
CPU: Intel(R) Pentium(R) 4 CPU 1.70GHz (Family: 15, Model: 1, Stepping: 2)
CPUflags:  MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled for x86 CPU with extensions: MMX MMX2 SSE SSE2

Playing tv://.
TV file format detected.
Selected driver: v4l2
 name: Video 4 Linux 2 input
 author: Martin Olschewski <[EMAIL PROTECTED]>
 comment: first try, more to come ;-)
Selected device: WinTV PVR 350
 Tuner cap: STEREO LANG1 LANG2
 Tuner rxs: MONO
 Capabilites:  video capture  video output  VBI capture device  VBI output  
tuner  audio  read/write
 supported norms: 0 = NTSC; 1 = PAL; 2 = SECAM;
 inputs: 0 = Composite 0; 1 = Composite 1; 2 = Composite 2; 3 = Composite 3; 4 
= Tuner 0; 5 = Composite 4; 6 = S-Video 0; 7 = S-Video 1; 8 = S-Video 2; 9 = 
S-Video 3;
 Current input: 0
 Current format: unknown (0x4745504d)
v4l2: current audio mode is : STEREO
v4l2: ioctl request buffers failed: Invalid argument
v4l2: 0 frames successfully processed, 0 frames dropped.
v4l2: ioctl set mute failed: Bad file descriptor
*** glibc detected *** mplayer: double free or corruption (fasttop): 0x095cd7c0 
***
======= Backtrace: =========
/lib/libc.so.6[0xaf1424]
/lib/libc.so.6(__libc_free+0x77)[0xaf195f]
mplayer[0x8185499]
======= Memory map: ========
00101000-00108000 r-xp 00000000 03:43 1793645    /usr/lib/libungif.so.4.1.3
00108000-00109000 rwxp 00006000 03:43 1793645    /usr/lib/libungif.so.4.1.3
00111000-00122000 r-xp 00000000 03:43 1790744    
/usr/lib/libcdda_interface.so.0.9.8
00122000-00123000 rwxp 00011000 03:43 1790744    
/usr/lib/libcdda_interface.so.0.9.8
00123000-0012a000 r-xp 00000000 03:43 1795321    
/usr/lib/libcdda_paranoia.so.0.9.8
0012a000-0012b000 rwxp 00007000 03:43 1795321    
/usr/lib/libcdda_paranoia.so.0.9.8
0012b000-00272000 r-xp 00000000 03:43 1794537    /usr/lib/libsmbclient.so
00272000-0027f000 rwxp 00147000 03:43 1794537    /usr/lib/libsmbclient.so
0027f000-00291000 rwxp 0027f000 00:00 0
00291000-00295000 r-xp 00000000 03:43 1795074    /usr/X11R6/lib/libXv.so.1.0
00295000-00296000 rwxp 00003000 03:43 1795074    /usr/X11R6/lib/libXv.so.1.0
00296000-0029e000 r-xp 00000000 03:43 2436216    /usr/X11R6/lib/libSM.so.6.0
0029e000-0029f000 rwxp 00007000 03:43 2436216    /usr/X11R6/lib/libSM.so.6.0
0029f000-002a8000 r-xp 00000000 03:43 1657682    
/lib/libgcc_s-4.0.0-20050520.so.1
002a8000-002a9000 rwxp 00009000 03:43 1657682    
/lib/libgcc_s-4.0.0-20050520.so.1
002aa000-002c8000 r-xp 00000000 03:43 137858     /usr/lib/libjpeg.so.62.0.0
002c8000-002c9000 rwxp 0001d000 03:43 137858     /usr/lib/libjpeg.so.62.0.0
002c9000-0034d000 r-xp 00000000 03:43 65135      
/usr/lib/libglib-2.0.so.0.600.40034d000-00352000 rwxp 00084000 03:43 65135      
/usr/lib/libglib-2.0.so.0.600.400352000-00369000 r-xp 00000000 03:43 2436215    
/usr/X11R6/lib/libICE.so.6.3
00369000-0036a000 rwxp 00016000 03:43 2436215    /usr/X11R6/lib/libICE.so.6.3
0036a000-0036c000 rwxp 0036a000 00:00 0
0036c000-00389000 r-xp 00000000 03:43 1797412    /usr/lib/libexpat.so.0.5.0
00389000-0038b000 rwxp 0001c000 03:43 1797412    /usr/lib/libexpat.so.0.5.0
00399000-003bf000 r-xp 00000000 03:43 1797458    
/usr/lib/libfontconfig.so.1.0.4003bf000-003c2000 rwxp 00026000 03:43 1797458    
/usr/lib/libfontconfig.so.1.0.4003c2000-003c3000 rwxp 003c2000 00:00 0
003c5000-003e8000 r-xp 00000000 03:43 1797394    /usr/lib/libpng12.so.0.1.2.8
003e8000-003e9000 rwxp 00023000 03:43 1797394    /usr/lib/libpng12.so.0.1.2.8
003e9000-003ee000 r-xp 00000000 03:43 1657696    /lib/libcrypt-2.3.5.so
003ee000-003ef000 r-xp 00004000 03:43 1657696    /lib/libcrypt-2.3.5.so
003ef000-003f0000 rwxp 00005000 03:43 1657696    /lib/libcrypt-2.3.5.so
003f0000-00417000 rwxp 003f0000 00:00 0
00430000-004a7000 r-xp 00000000 03:43 1797529    /usr/X11R6/lib/libGL.so.1.2
004a7000-004aa000 rwxp 00077000 03:43 1797529    /usr/X11R6/lib/libGL.so.1.2
004aa000-004ab000 rwxp 004aa000 00:00 0
00769000-0077e000 r-xp 00000000 03:43 65475      /usr/lib/libsasl2.so.2.0.20
0077e000-0077f000 rwxp 00015000 03:43 65475      /usr/lib/libsasl2.so.2.0.20
00784000-00786000 r-xp 00000000 03:43 1657686    /lib/libcom_err.so.2.1
00786000-00787000 rwxp 00001000 03:43 1657686    /lib/libcom_err.so.2.1
00789000-007f8000 r-xp 00000000 03:43 66190      /usr/lib/libkrb5.so.3.2
007f8000-007fb000 rwxp 0006e000 03:43 66190      /usr/lib/libkrb5.so.3.2
007fd000-007ff000 r-xp 00000000 03:43 65189      /usr/lib/libkrb5support.so.0.0
007ff000-00800000 rwxp 00001000 03:43 65189      /usr/lib/libkrb5support.so.0.0
00802000-00825000 r-xp 00000000 03:43 66189      /usr/lib/libk5crypto.so.3.0
00825000-00826000 rwxp 00023000 03:43 66189      /usr/lib/libk5crypto.so.3.0
0082e000-00844000 r-xp 00000000 03:43 66191      /usr/lib/libgssapi_krb5.so.2.2
00844000-00845000 rwxp 00016000 03:43 66191      /usr/lib/libgssapi_krb5.so.2.2
00871000-00876000 r-xp 00000000 03:43 1795621    /usr/lib/libartsc.so.0.0.0
00876000-00877000 rwxp 00004000 03:43 1795621    /usr/lib/libartsc.so.0.0.0
008a5000-0099d000 r-xp 00000000 03:43 1657687    /lib/libcrypto.so.0.9.7f
0099d000-009af000 rwxp 000f8000 03:43 1657687    /lib/libcrypto.so.0.9.7f
009af000-009b2000 rwxp 009af000 00:00 0
009b4000-009e9000 r-xp 00000000 03:43 1657688    /lib/libssl.so.0.9.7f
009e9000-009ec000 rwxp 00035000 03:43 1657688    /lib/libssl.so.0.9.7f
009ee000-00a0f000 r-xp 00000000 03:43 137867     /usr/lib/libaudiofile.so.0.0.2
00a0f000-00a12000 rwxp 00020000 03:43 137867     /usr/lib/libaudiofile.so.0.0.2
00a14000-00a1d000 r-xp 00000000 03:43 137868     /usr/lib/libesd.so.0.2.35
00a1d000-00a1e000 rwxp 00009000 03:43 137868     /usr/lib/libesd.so.0.2.35
00a3a000-00a3e000 r-xp 00000000 03:43 1796927    
/usr/lib/libgthread-2.0.so.0.600.4
00a3e000-00a3f000 rwxp 00003000 03:43 1796927    
/usr/lib/libgthread-2.0.so.0.600.4
00a4c000-00a59000 r-xp 00000000 03:43 1792788    /usr/lib/liblber-2.2.so.7.0.16
00a59000-00a5a000 rwxp 0000c000 03:43 1792788    /usr/lib/liblber-2.2.so.7.0.16
00a65000-00a69000 r-xp 00000000 03:43 1795167    
/usr/X11R6/lib/libXxf86vm.so.1.0
00a69000-00a6a000 rwxp 00003000 03:43 1795167    
/usr/X11R6/lib/libXxf86vm.so.1.0
00a6c000-00a86000 r-xp 00000000 03:43 1657677    /lib/ld-2.3.5.so
00a86000-00a87000 r-xp 00019000 03:43 1657677    /lib/ld-2.3.5.so
00a87000-00a88000 rwxp 0001a000 03:43 1657677    /lib/ld-2.3.5.so
00a8e000-00bb2000 r-xp 00000000 03:43 1657678    /lib/libc-2.3.5.so
00bb2000-00bb4000 r-xp 00124000 03:43 1657678    /lib/libc-2.3.5.so
00bb4000-00bb6000 rwxp 00126000 03:43 1657678    /lib/libc-2.3.5.so
00bb6000-00bb8000 rwxp 00bb6000 00:00 0
00bba000-00bdc000 r-xp 00000000 03:43 1657679    /lib/libm-2.3.5.so
00bdc000-00bdd000 r-xp 00021000 03:43 1657679    /lib/libm-2.3.5.so
00bdd000-00bde000 rwxp 00022000 03:43 1657679    /lib/libm-2.3.5.so
00be0000-00be2000 r-xp 00000000 03:43 1657680    /lib/libdl-2.3.5.so
00be2000-00be3000 r-xp 00001000 03:43 1657680    /lib/libdl-2.3.5.so
00be3000-00be4000 rwxp 00002000 03:43 1657680    /lib/libdl-2.3.5.so
00be6000-00bf8000 r-xp 00000000 03:43 137857     /usr/lib/libz.so.1.2.2.2
00bf8000-00bf9000 rwxp 00011000 03:43 137857     /usr/lib/libz.so.1.2.2.2
00bfb000-00ccb000 r-xp 00000000 03:43 2436208    /usr/X11R6/lib/libX11.so.6.2
00ccb000-00ccf000 rwxp 000cf000 03:43 2436208    /usr/X11R6/lib/libX11.so.6.2
00cd1000-00cdf000 r-xp 00000000 03:43 2436209    /usr/X11R6/lib/libXext.so.6.4
00cdf000-00ce0000 rwxp 0000e000 03:43 2436209    /usr/X11R6/lib/libXext.so.6.4
00ce2000-00cf0000 r-xp 00000000 03:43 1657681    /lib/libpthread-2.3.5.so
00cf0000-00cf1000 r-xp 0000d000 03:43 1657681    /lib/libpthread-2.3.5.so
00cf1000-00cf2000 rwxp 0000e000 03:43 1657681    /lib/libpthread-2.3.5.so
00cf2000-00cf4000 rwxp 00cf2000 00:00 0
00cf6000-00d57000 r-xp 00000000 03:43 137861     /usr/lib/libfreetype.so.6.3.7
00d57000-00d5e000 rwxp 00061000 03:43 137861     /usr/lib/libfreetype.so.6.3.7
00d63000-00d64000 r-xp 00d63000 00:00 0
00d67000-00d6c000 r-xp 00000000 03:43 1797424    
/usr/X11R6/lib/libXxf86dga.so.1.0
00d6c000-00d6d000 rwxp 00004000 03:43 1797424    
/usr/X11R6/lib/libXxf86dga.so.1.0
00db7000-00db9000 r-xp 00000000 03:43 2436213    
/usr/X11R6/lib/libXinerama.so.1.0
00db9000-00dba000 rwxp 00001000 03:43 2436213    
/usr/X11R6/lib/libXinerama.so.1.0
00de3000-00df2000 r-xp 00000000 03:43 1657683    /lib/libresolv-2.3.5.so
00df2000-00df3000 r-xp 0000e000 03:43 1657683    /lib/libresolv-2.3.5.so
00df3000-00df4000 rwxp 0000f000 03:43 1657683    /lib/libresolv-2.3.5.so
00df4000-00df6000 rwxp 00df4000 00:00 0
00df8000-00dfb000 r-xp 00000000 03:43 66195      
/usr/lib/libgmodule-2.0.so.0.600.4
00dfb000-00dfc000 rwxp 00002000 03:43 66195      
/usr/lib/libgmodule-2.0.so.0.600.4
029d1000-02a0f000 r-xp 00000000 03:43 1792882    /usr/lib/libncurses.so.5.4
02a0f000-02a18000 rwxp 0003d000 03:43 1792882    /usr/lib/libncurses.so.5.4
02d5d000-02d91000 r-xp 00000000 03:43 1793640    /usr/lib/libldap-2.2.so.7.0.16
02d91000-02d93000 rwxp 00033000 03:43 1793640    /usr/lib/libldap-2.2.so.7.0.16
03070000-030de000 r-xp 00000000 03:43 1796988    /usr/lib/libSDL-1.2.so.0.7.1
030de000-030e0000 rwxp 0006e000 03:43 1796988    /usr/lib/libSDL-1.2.so.0.7.1
030e0000-030fb000 rwxp 030e0000 00:00 0
035eb000-036a8000 r-xp 00000000 03:43 1657690    /lib/libasound.so.2.0.0
036a8000-036b6000 rwxp 000bd000 03:43 1657690    /lib/libasound.so.2.0.0
03a24000-03a36000 r-xp 00000000 03:43 1657689    /lib/libnsl-2.3.5.so
03a36000-03a37000 r-xp 00011000 03:43 1657689    /lib/libnsl-2.3.5.so
03a37000-03a38000 rwxp 00012000 03:43 1657689    /lib/libnsl-2.3.5.so
03a38000-03a3a000 rwxp 03a38000 00:00 0
08048000-08644000 r-xp 00000000 03:43 1793542    /usr/local/bin/mplayer
08644000-08696000 rw-p 005fb000 03:43 1793542    /usr/local/bin/mplayer
08696000-08745000 rw-p 08696000 00:00 0
095ad000-095ef000 rw-p 095ad000 00:00 0          [heap]
b7c00000-b7c21000 rw-p b7c00000 00:00 0
b7c21000-b7d00000 ---p b7c21000 00:00 0
b7d71000-b7d72000 rw-p b7d71000 00:00 0
b7d72000-b7d78000 r--s 00000000 03:43 1851590    
/usr/lib/gconv/gconv-modules.cache
b7d78000-b7f78000 r--p 00000000 03:43 1789483    /usr/lib/locale/locale-archive
b7f78000-b7f83000 rw-p b7f78000 00:00 0
b7f98000-b7f99000 rw-p b7f98000 00:00 0
bf983000-bf997000 rwxp bf983000 00:00 0          [stack]
bf997000-bf999000 rw-p bf997000 00:00 0


MPlayer interrupted by signal 6 in module: demux_open
- MPlayer crashed. This shouldn't happen.
  It can be a bug in the MPlayer code _or_ in your drivers _or_ in your
  gcc version. If you think it's MPlayer's fault, please read
  DOCS/HTML/en/bugreports.html and follow the instructions there. We can't and
  won't help unless you provide this information when reporting a possible bug.
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to