Well, this at least shows that mplayer is the one that crashes, so it
has nothing to do with your Freevo config ;-)
Mplayer should not crash because of a bad parameter, it should just
give you a proper warning with what's wrong, but this output only imho
only tells us that mplayer has crashed...

Can you play anything else with mplayer?
Just type 'mplayer videofile.mpg' to play a normal video file to try.

If you only wish to use mplayer for watching TV, it might be an idea
to switch to TV Time as mentioned earlier by Jody Gugelhupf.
And for recording, as you seem to have an PVR-350 (this is ivtv am I
right?) you have another (better!) option for recording than with
mencoder as well :-)

Off course you could try to solve the issues with mplayer, but it
might not be worth the effort ;-)


Michel

2007/6/27, Yugandhar G.V <[EMAIL PROTECTED]>:
> Hi john,
>          I have tried running the mplayer from the command line as follows
>         $ mplayer tv:// -tv
> driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=188.3
>         My mplayer is getting crashed. I am sending the output of the
> command in textline can you tell me what's being happened.
>         But when I capture the video from the card and store it in a file
> and plays it using mplayer is working.
>         Cat /dev/video0 > test.mpg &
>         Mplayer test.mpg it is working fine and I can able to watch the tv.
>
> Regards,
> Yugandhar.
>
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of John
> Molohan
> Sent: Monday, June 25, 2007 1:38 PM
> To: [email protected]
> Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has no
> data loaded)
>
> Michel Hoogervorst wrote:
> > This should work indeed...
> >
> > Maybe you can try to run mplayer from the command line yourself, to
> > check if TV works at all.  Try something like:
> >
> > $ mplayer tv:// -tv
> driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=155
> >
> > And see if that works at all?
> >
> >
> > Michel
> >
> > 2007/6/25, Yugandhar G.V <[EMAIL PROTECTED]>:
> >
> >> Hi john,
> >>      I will explain you what I have done.
> >>         I have the changed the file freevo.conf which you can see below
> >>         cdparanoia = /usr/bin/cdparanoia
> >>         chanlist = india
> >>         display = x11
> >>         flac = /usr/bin/flac
> >>         geometry = 800x600
> >>         jpegtran = /usr/local/bin/jpegtran
> >>         lame = /usr/local/bin/lame
> >>         lsdvd = /usr/bin/lsdvd
> >>         mencoder = /usr/local/bin/mencoder
> >>         mplayer = /usr/local/bin/mplayer
> >>         oggenc = /usr/bin/oggenc
> >>         renice = /usr/bin/renice
> >>         setterm = /usr/bin/setterm
> >>         tv = pal
> >>         tvtime = /usr/bin/tvtime
> >>         version = 2.1
> >>         and I have changed the local_conf.py file which contains list of
> >> channels which u can see below
> >>         TV_CHANNELS = [('2', 'DD National',              '1'),
> >>                 ('3', 'DD Hindi',              '3'),
> >>                 ('4', 'DD SPorts',               '4') ]
> >>         Which has the frequencies in freq.py file which is shown below
> >>         PAL_INDIA = [
> >>     ( "1", 188600 ),
> >>     ( "2", 188300 ),
> >>     ( "3", 188400 ),
> >>     ( "4", 188500 ),
> >>     ( "5", 155000 ),
> >>     ( "6", 191000 ),
> >>     ( "7", 144000 ),
> >>     ( "8", 150000 ),
> >> ]
> >>
> >>
> >> CHANLIST = {
> >>      "us-bcast"         : dict(NTSC_BCAST),
> >>      "us-cable"         : dict(NTSC_CABLE),
> >>      "us-cable-hrc"     : dict(NTSC_HRC),
> >>      "japan-bcast"      : dict(NTSC_BCAST_JP),
> >>      "japan-cable"      : dict(NTSC_CABLE_JP),
> >>      "europe-west"      : dict(PAL_EUROPE),
> >>      "europe-east"      : dict(PAL_EUROPE_EAST),
> >>      "italy"            : dict(PAL_ITALY),
> >>      "newzealand"       : dict(PAL_NEWZEALAND),
> >>      "australia"        : dict(PAL_AUSTRALIA),
> >>      "ireland"          : dict(PAL_IRELAND),
> >>      "france"           : dict(SECAM_FRANCE),
> >>      "china-bcast"      : dict(PAL_CHINA),
> >>      "canada-cable"     : dict(NTSC_CABLE_CAN),
> >>      "southafrica"      : dict(PAL_BCAST_ZA),
> >>      "argentina"        : dict(ARGENTINA),
> >>      "india"            : dict(PAL_INDIA),
> >>
> >> }
> >>         I have the done above changes to the corresponding files and
> started
> >> freevo application. Once the applications shows the menu I enter into
> watch
> >> TV and then to TV guide which shows my list of channels with channels has
> no
> >> data loaded and enter to a particular channel it is not showing me the
> TV.
> >> Is this the right way to play the TV even if my TV guide is not working.
> Let
> >> me know anything wrong I have done.
> >>
> >> Regards,
> >> Yugandhar
> >>
> Hi Yungandhar,
>
> That all looks good so far.As Michel suggests it would be a good idea to
> test it's working from the command line. What tv plugin are you using,
> mplayer, tvtime? After that turn have a look at your log files probably
> /var/log/freevo/main-x.log and see what command freevo tries to use to
> play tv. Copy and paste this to the command line and see what's
> happening there.
>
> John
>
> >> -----Original Message-----
> >> From: [EMAIL PROTECTED]
> >> [mailto:[EMAIL PROTECTED] On Behalf Of John
> >> Molohan
> >> Sent: Friday, June 22, 2007 7:29 PM
> >> To: [email protected]
> >> Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has
> no
> >> data loaded)
> >>
> >> Yugandhar G.V wrote:
> >>
> >>> Hi all,
> >>>
> >>>
> >> Hi.
> >>
> >>> I have an Hauppauge card PVR-350 and installed the ivtv driver for the
> >>> card on my fedora core 4 pc. I have tested the card for both FM Radio
> >>> and TV by manually setting the frequencies of the card. Everything is
> >>> working fine.
> >>>
> >>> I have installed freevo application which supports the Hauppauge card
> >>> PVR-350 and configured the freevo to use my Hauppauge card. Freevo
> >>> which uses frequencies from freq.py file doesn't have the frequency
> >>> list for india and one of the member of freevo users list Michel who
> >>> has given me the advice to change the freq.py and edit your country
> >>> frequencies. I have done that but still my TV guide is not showing
> >>> anything it is showing Channel has not data loaded.
> >>>
> >>> Can anyone in the list help me how can I fully configure and edit the
> >>> frequencies for India and make it.
> >>>
> >>> Regards,
> >>>
> >>> Yugandhar.h
> >>>
> >>>
> >> Watching TV and having program information show up in the TV Guide are
> >> two separate issues and one does not require the other. What I mean from
> >> this is that if you have you're tv channels correctly defined in
> >> local_conf.py (and in your case freq.py as they weren't included with
> >> that) you can go into the tv guide and even if it shows 'channel has no
> >> data loaded' you should still be able to hit play and that tv channel
> >> should start playing. If this is not working please let us know.
> >>
> >> To get a tv guide working with program info so you see data on the tv
> >> shows that are on and do not get the 'channel has no data loaded'
> >> message you need to have a source configured that provides a xml file
> >> for freevo with this information. In Ireland I do this using the package
> >> xmltv. I configure this separately to freevo to download information on
> >> all the channels I receive and it stores this in a file I specify - in
> >> my case /tmp/TV.xml (as this is where freevo looks for this information
> >> by default). xmltv has different sources for getting this data, for
> >> example my data is taken by xmltv from the BBC in England. It downloads
> >> a file they make freely available on their website with all the tv guide
> >> information. xmltv used similar sources in different countries depending
> >> on whether you are in Ireland or England or Germany etc. The real issue
> >> here is I don't know if there is a xmltv grabber (as they are called)
> >> for India, you will need to find this out. If there is not you should
> >> still be able to view tv just without any guide information.
> >>
> >> If freevo has access to a TV.xml file it will load the information that
> >> it finds in it that matches the channels you specify in your
> >> local_conf.py. I hope this might in some way clear things up for you,
> >> let us know how you get on.
> >>
> >> John
> >>
> >>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>
>
>

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to