I believe that approach isn't working for mplayer/mencoder, as Freevo
tries to pass the unknown channel number to mplayer, instead of the
freq's.
That's why I changed my freq.py instead of using FREQUENCY_TABLE in
local_conf.py.

(This issue was in 1.6.2 I believe, don't know if this might have been
fixed in the meantime?)

2007/6/25, John Molohan <[EMAIL PROTECTED]>:
> Duncan Webb wrote:
> > -----BEGIN PGP SIGNED MESSAGE-----
> > Hash: SHA1
> >
> > John Molohan wrote:
> >
> >> Michel Hoogervorst wrote:
> >>
> >>> This should work indeed...
> >>>
> >>> Maybe you can try to run mplayer from the command line yourself, to
> >>> check if TV works at all.  Try something like:
> >>>
> >>> $ mplayer tv:// -tv 
> >>> driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=155
> >>>
> >>> And see if that works at all?
> >>>
> >>>
> >>> Michel
> >>>
> >>> 2007/6/25, Yugandhar G.V <[EMAIL PROTECTED]>:
> >>>
> >>>
> >>>> Hi john,
> >>>>      I will explain you what I have done.
> >>>>         I have the changed the file freevo.conf which you can see below
> >>>>         cdparanoia = /usr/bin/cdparanoia
> >>>>         chanlist = india
> >>>>         display = x11
> >>>>         flac = /usr/bin/flac
> >>>>         geometry = 800x600
> >>>>         jpegtran = /usr/local/bin/jpegtran
> >>>>         lame = /usr/local/bin/lame
> >>>>         lsdvd = /usr/bin/lsdvd
> >>>>         mencoder = /usr/local/bin/mencoder
> >>>>         mplayer = /usr/local/bin/mplayer
> >>>>         oggenc = /usr/bin/oggenc
> >>>>         renice = /usr/bin/renice
> >>>>         setterm = /usr/bin/setterm
> >>>>         tv = pal
> >>>>         tvtime = /usr/bin/tvtime
> >>>>         version = 2.1
> >>>>         and I have changed the local_conf.py file which contains list of
> >>>> channels which u can see below
> >>>>         TV_CHANNELS = [('2', 'DD National',              '1'),
> >>>>                 ('3', 'DD Hindi',              '3'),
> >>>>                 ('4', 'DD SPorts',               '4') ]
> >>>>         Which has the frequencies in freq.py file which is shown below
> >>>>         PAL_INDIA = [
> >>>>     ( "1", 188600 ),
> >>>>     ( "2", 188300 ),
> >>>>     ( "3", 188400 ),
> >>>>     ( "4", 188500 ),
> >>>>     ( "5", 155000 ),
> >>>>     ( "6", 191000 ),
> >>>>     ( "7", 144000 ),
> >>>>     ( "8", 150000 ),
> >>>> ]
> >>>>
> >>>>
> >>>> CHANLIST = {
> >>>>      "us-bcast"         : dict(NTSC_BCAST),
> >>>>      "us-cable"         : dict(NTSC_CABLE),
> >>>>      "us-cable-hrc"     : dict(NTSC_HRC),
> >>>>      "japan-bcast"      : dict(NTSC_BCAST_JP),
> >>>>      "japan-cable"      : dict(NTSC_CABLE_JP),
> >>>>      "europe-west"      : dict(PAL_EUROPE),
> >>>>      "europe-east"      : dict(PAL_EUROPE_EAST),
> >>>>      "italy"            : dict(PAL_ITALY),
> >>>>      "newzealand"       : dict(PAL_NEWZEALAND),
> >>>>      "australia"        : dict(PAL_AUSTRALIA),
> >>>>      "ireland"          : dict(PAL_IRELAND),
> >>>>      "france"           : dict(SECAM_FRANCE),
> >>>>      "china-bcast"      : dict(PAL_CHINA),
> >>>>      "canada-cable"     : dict(NTSC_CABLE_CAN),
> >>>>      "southafrica"      : dict(PAL_BCAST_ZA),
> >>>>      "argentina"        : dict(ARGENTINA),
> >>>>      "india"            : dict(PAL_INDIA),
> >>>>
> >>>> }
> >>>>         I have the done above changes to the corresponding files and 
> >>>> started
> >>>> freevo application. Once the applications shows the menu I enter into 
> >>>> watch
> >>>> TV and then to TV guide which shows my list of channels with channels 
> >>>> has no
> >>>> data loaded and enter to a particular channel it is not showing me the 
> >>>> TV.
> >>>> Is this the right way to play the TV even if my TV guide is not working. 
> >>>> Let
> >>>> me know anything wrong I have done.
> >>>>
> >>>> Regards,
> >>>> Yugandhar
> >>>>
> >>>>
> >> Hi Yungandhar,
> >>
> >> That all looks good so far.As Michel suggests it would be a good idea to
> >> test it's working from the command line. What tv plugin are you using,
> >> mplayer, tvtime? After that turn have a look at your log files probably
> >> /var/log/freevo/main-x.log and see what command freevo tries to use to
> >> play tv. Copy and paste this to the command line and see what's
> >> happening there.
> >>
> >>
> >
> > Another way to do this is in local_conf.py include:
> > TV_CHANNELS = [
> >     ('2', 'DD National', '1'),
> >     ('3', 'DD Hindi',    '3'),
> >     ('4', 'DD SPorts',   '4'),
> > ]
> >
> > FREQUENCY_TABLE = {
> >     "1", 188600,
> >     "2", 188300,
> >     "3", 188400,
> >     "4", 188500,
> > }
> >
> > The names '2', '3', '4' in the first column of TV_CHANNELS need to be
> > the same as your xmltv guide.
> >
> > Duncan
> >
> Very true and probably much easier for a noob. I wanted to encourage the
> other route in order to get a patch for freq.py (plus he was already
> going down this route). It just means that in future we will have more
> locations supported by default.
>
> John
> >
> >>>> -----Original Message-----
> >>>> From: [EMAIL PROTECTED]
> >>>> [mailto:[EMAIL PROTECTED] On Behalf Of John
> >>>> Molohan
> >>>> Sent: Friday, June 22, 2007 7:29 PM
> >>>> To: [email protected]
> >>>> Subject: Re: [Freevo-users] Regarding Channel List for India(Channel has 
> >>>> no
> >>>> data loaded)
> >>>>
> >>>> Yugandhar G.V wrote:
> >>>>
> >>>>
> >>>>> Hi all,
> >>>>>
> >>>>>
> >>>>>
> >>>> Hi.
> >>>>
> >>>>
> >>>>> I have an Hauppauge card PVR-350 and installed the ivtv driver for the
> >>>>> card on my fedora core 4 pc. I have tested the card for both FM Radio
> >>>>> and TV by manually setting the frequencies of the card. Everything is
> >>>>> working fine.
> >>>>>
> >>>>> I have installed freevo application which supports the Hauppauge card
> >>>>> PVR-350 and configured the freevo to use my Hauppauge card. Freevo
> >>>>> which uses frequencies from freq.py file doesn't have the frequency
> >>>>> list for india and one of the member of freevo users list Michel who
> >>>>> has given me the advice to change the freq.py and edit your country
> >>>>> frequencies. I have done that but still my TV guide is not showing
> >>>>> anything it is showing Channel has not data loaded.
> >>>>>
> >>>>> Can anyone in the list help me how can I fully configure and edit the
> >>>>> frequencies for India and make it.
> >>>>>
> >>>>> Regards,
> >>>>>
> >>>>> Yugandhar.h
> >>>>>
> >>>>>
> >>>>>
> >>>> Watching TV and having program information show up in the TV Guide are
> >>>> two separate issues and one does not require the other. What I mean from
> >>>> this is that if you have you're tv channels correctly defined in
> >>>> local_conf.py (and in your case freq.py as they weren't included with
> >>>> that) you can go into the tv guide and even if it shows 'channel has no
> >>>> data loaded' you should still be able to hit play and that tv channel
> >>>> should start playing. If this is not working please let us know.
> >>>>
> >>>> To get a tv guide working with program info so you see data on the tv
> >>>> shows that are on and do not get the 'channel has no data loaded'
> >>>> message you need to have a source configured that provides a xml file
> >>>> for freevo with this information. In Ireland I do this using the package
> >>>> xmltv. I configure this separately to freevo to download information on
> >>>> all the channels I receive and it stores this in a file I specify - in
> >>>> my case /tmp/TV.xml (as this is where freevo looks for this information
> >>>> by default). xmltv has different sources for getting this data, for
> >>>> example my data is taken by xmltv from the BBC in England. It downloads
> >>>> a file they make freely available on their website with all the tv guide
> >>>> information. xmltv used similar sources in different countries depending
> >>>> on whether you are in Ireland or England or Germany etc. The real issue
> >>>> here is I don't know if there is a xmltv grabber (as they are called)
> >>>> for India, you will need to find this out. If there is not you should
> >>>> still be able to view tv just without any guide information.
> >>>>
> >>>> If freevo has access to a TV.xml file it will load the information that
> >>>> it finds in it that matches the channels you specify in your
> >>>> local_conf.py. I hope this might in some way clear things up for you,
> >>>> let us know how you get on.
> >>>>
> > -----BEGIN PGP SIGNATURE-----
> > Version: GnuPG v1.4.7 (GNU/Linux)
> > Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
> >
> > iD8DBQFGf+6yNi6l+Xvys44RAubvAJ4uJei4hSEphLpdwMXbvaDAQouxsgCfcMfZ
> > zLhykCl+0EAJIWGEz6HGUMY=
> > =BNeA
> > -----END PGP SIGNATURE-----
> >
> > -------------------------------------------------------------------------
> > This SF.net email is sponsored by DB2 Express
> > Download DB2 Express C - the FREE version of DB2 express and take
> > control of your XML. No limits. Just data. Click to get it now.
> > http://sourceforge.net/powerbar/db2/
> > _______________________________________________
> > Freevo-users mailing list
> > [email protected]
> > https://lists.sourceforge.net/lists/listinfo/freevo-users
> >
>
>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by DB2 Express
> Download DB2 Express C - the FREE version of DB2 express and take
> control of your XML. No limits. Just data. Click to get it now.
> http://sourceforge.net/powerbar/db2/
> _______________________________________________
> Freevo-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/freevo-users
>

-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to