> Well, this at least shows that mplayer is the one that crashes, so it
> has nothing to do with your Freevo config ;-)

It is not possible to use the tv:// uri with ivtv cards. So the
local_conf.py is incorrect.

> Mplayer should not crash because of a bad parameter, it should just
> give you a proper warning with what's wrong, but this output only imho
> only tells us that mplayer has crashed...

It used to say that streaming is not supported but this could be because a
subversion of mplayer is being used or it was incorrectly built from the
sources.

> Can you play anything else with mplayer?
> Just type 'mplayer videofile.mpg' to play a normal video file to try.
>
> If you only wish to use mplayer for watching TV, it might be an idea
> to switch to TV Time as mentioned earlier by Jody Gugelhupf.
> And for recording, as you seem to have an PVR-350 (this is ivtv am I
> right?) you have another (better!) option for recording than with
> mencoder as well :-)
>
> Off course you could try to solve the issues with mplayer, but it
> might not be worth the effort ;-)

Depending on the hardware, xine can be slow to load, mplayer is much faster.

> 2007/6/27, Yugandhar G.V <[EMAIL PROTECTED]>:
>> Hi john,
>>          I have tried running the mplayer from the command line as
>> follows
>>         $ mplayer tv:// -tv
>> driver=v4l2:device=/dev/video0:input=0:norm=PAL:freq=188.3
>>         My mplayer is getting crashed. I am sending the output of the
>> command in textline can you tell me what's being happened.
>>         But when I capture the video from the card and store it in a
>> file
>> and plays it using mplayer is working.
>>         Cat /dev/video0 > test.mpg &
>>         Mplayer test.mpg it is working fine and I can able to watch the
>> tv.

It may be sensible to post the whole of your local_conf.py and the dmesg
output from loading the tv card.

Just remove any passwords and amazon keys first.

Duncan


-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Freevo-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to