Duncan Webb wrote: > I've been testing this but the CPU usage of xine is not affected by freevo. > > Using a matrox G400DH the CPU usage is about 80% with or without freevo > running. > > The only thing that I can think of is that freevo is using more memory > and you have just gone over the top of the physical memory. You can > check this with Dag Wieers' dstat or vmstat program. > > What you can do is a testing install, using the howto in the wiki and > then you can have different versions installed and see if there is any > real difference. http://doc.freevo.org/SourceSVNInstallation > > Duncan > > Memory is a very good suggestion, I have reverted back to 1.7.1 and this seems more stable and my wife was able to use the media centre to watch several programs today without the media centre crashing. I have noticed that xine playback now uses less CPU than before and playback is more reliable and responsive.
The machine does have very little memory, only 128meg, I might have to see if I can find some budget for more ram (I need low profile ram to fit in my case). And see if more memory helps. For now I have a much happier 1.7.1 install. I forward ported some of the changes, such as the tv_guide cElementTree for python 2.5 fix so it is still nicer than before :) Cheers. Steve. ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2008. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Freevo-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/freevo-users
