David Frager said the following, on 29.02.2008 05:26:
> I added the configuration for XINE_TV_TIMESHIFT_FILEMASK, and I no longer
> see the error, however, I still do not get any A/V.  I see a similar
> behaviour when I issue xine from an xterm.  If I use mplayer from an xterm,
> I do get A/V.  Is there any reason to use xine vs mplayer?
>
>
> Driver: ivtv
> Card: Hauppauge WinTV PVR-150
> Version: 256.00
> Capabilities: 0x01070051
> Enumerating supported Standards.
>   0: 0xf PAL-BGH
>   1: 0xe0 PAL-DK
>   2: 0x10 PAL-I
>   3: 0x100 PAL-M
>   4: 0x200 PAL-N
>   5: 0x400 PAL-Nc
>   6: 0xd0000 SECAM-BGH
>   7: 0x320000 SECAM-DK
>   8: 0x400000 SECAM-L
>   9: 0x800000 SECAM-L'
>   10: 0x1000 NTSC-M
>   11: 0x2000 NTSC-J
>   12: 0x8000 NTSC-K
> Current Standard is: 0xb000
> Enumerating supported Inputs.
>   0: Tuner 1
>   1: S-Video 1
>   2: Composite 1
>   3: S-Video 2
>   4: Composite 2
> Input: 1
> Width: 720, Height: 480
> Read Frequency: 1076
> CODEC::aspect: 2
> CODEC::audio_bitmask: 0x69
> CODEC::bframes: 3
> CODEC::bitrate_mode: 1
> CODEC::bitrate: 8000000
> CODEC::bitrate_peak: 9600000
> CODEC::dnr_mode: 0
> CODEC::dnr_spatial: 0
> CODEC::dnr_temporal: 0
> CODEC::dnr_type: 0
> CODEC::framerate: 0
> CODEC::framespergop: 12
> CODEC::gop_closure: 1
> CODEC::pulldown: 0
> CODEC::stream_type: 10
> 2008-02-28 21:54:06,963 INFO     ivtv_xine_tv.py (371): IVTV_XINE_TV: Show
> OSD Message: 'KDFW: Fox 4 News at 9'
> 2008-02-28 21:54:06,964 INFO     ivtv_xine_tv.py (391): IVTV_XINE_TV:
> SeekEnd not needed
> 2008-02-28 21:54:06,966 INFO     ivtv_xine_tv.py (881): XineApp: Starting
> xine, cmd = '/usr/bin/xine --auto-play=fq --hide-gui --borderless --geometry
> 800x600+0+0 --no-splash --no-lirc --post='pp:quality=10;expand' -V None -A
> None --stdctl pvr:///storedMedia/livetv'
>   

No Video and audio, not too surprising when -V and -A are None. There
are the video and audio driver that is used by xine. You need to set
them in your local_conf.py. Use freevo plugins -i tv.ivtv_xine_tv to see
the settings.

BTW this works with just about all plug-ins. freevo plugins is a very
useful command.

HTH
Duncan

-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Freevo-users mailing list
Freevo-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/freevo-users

Reply via email to