On Mon, Mar 1, 2010 at 5:48 PM, Jerry Feldman <g...@blu.org> wrote: > pe_align (128 sectors) must not be less than pe_align_offset > (36028797018963967 sectors)
By my calculations, the second number of sectors works out to 16 million terabytes, which makes me suspect the diagnostic itself is broken, or being fed broken data. > Nore that /dev/md1 is formatted ext4. Are you trying to import an ext4 filesystem into LVM "in place"? If so, that won't work. You have to create a new (empty) LV (Logical Volume) and copy the filesystem into the LV. You can do the copy in any number of ways, but mounting both and doing "cp -a" generally works. If you just want to use /dev/md1 as a new empty PV (Physical Volume), then try erasing the filesystem superblock on /dev/md1 so LVM thinks it is blank. WARNING: The following command will destroy all data on the filesystem! dd if=/dev/zero of=/dev/md1 bs=512 count=1 WARNING: The preceding command will destroy all data on the filesystem! (I know you know what "dd if=/dev/zero" does; the warnings are for other readers. (Who also don't care about data remanence.)) You can't do an in-place import of a filesystem to an LV because LVM LVs are structured entities which are not always linear, and LVM PVs contain metadata at the start (and maybe also the end), neither of which are how filesystems see block devices. There are probabbly cases where it would be doable in theory, but I don't think anyone's bothered with code. > What I am trying to do is to migrate my system (LVM on /dev/sda2) to raid1. I'm not sure if I have the whole picture. Let me pitch a scenario: Existing system is single disk, no RAID sda = Existing disk sda1 = Small boot partition sda2 = Large LVM PV LVM volume group name VolGroup00 One or more filesystems and/or swap spaces in LVM LVs Goal: Migrate system to RAID 1 in-place # make a full backup of everything to offline media # test the backup # add new new disk as /dev/sdc # set partitions on sdc to be same or larger than sda # create degraded mirrors on new disk mdadm --create /dev/md0 --level=1 --raid-devices=2 /dev/sdc1 missing mdadm --create /dev/md1 --level=1 --raid-devices=2 /dev/sdc2 missing # initialize md1 as an LVM PV pvcreate /dev/md1 # add new the PV to the existing VG (Volume Group) vgextend VolGroup00 /dev/md1 # make sure that backup is still there # move data to new PV pvmove /dev/sda2 /dev/md1 # get coffee, make sandwich, read book, etc. # remove the now unused old PV from old disk vgreduce VolGroup00 /dev/sda2 # (things get vague now, 'cause I don't want to type everything) # (if anyone wants help on something, say so) # migrate boot partition to /dev/md0 # zero first block of /dev/sda1 and /dev/sda2 to avoid confusion # add sda partitions to mirror sets mdadm --add /dev/md0 /dev/sda1 mdadm --add /dev/md1 /dev/sda2 # install boot loader on /dev/md0 and/or on /dev/sdc # maybe some other stuff that I forgot Everybody got that? ;-) -- Ben _______________________________________________ gnhlug-discuss mailing list gnhlug-discuss@mail.gnhlug.org http://mail.gnhlug.org/mailman/listinfo/gnhlug-discuss/