On Wed, 17 Oct 2001, Rich C wrote: > I had no RAID array defined. The hard drives were still connected to the > ATA-100 connectors (IDE-2, 3), not the standard IDE UDMA33/66 ports > (IDE-0, 1)
That is likely going to be the problem. If the drives are connected to the RAID controller, then they will need to have a driver for that controller, even if you are not using the RAID features. Move the drives to the "standard" controller (the one on the VIA southbridge), and I bet things will start working. Or at least get closer to working. -- Ben Scott <[EMAIL PROTECTED]> | The opinions expressed in this message are those of the author and do not | | necessarily represent the views or policy of any other person, entity or | | organization. All information is provided without warranty of any kind. | ********************************************************** To unsubscribe from this list, send mail to [EMAIL PROTECTED] with the following text in the *body* (*not* the subject line) of the letter: unsubscribe gnhlug **********************************************************