per resurrectar un linksys això ho vaig provar i a mi em va funcionar
http://wiki.openwrt.org/OpenWrtDocs/Installing/TFTP

no sé si ja ho has provat. Però amb això perdràs tota la informació
(configuracions, arxius, paquets).

On Wed, Apr 9, 2008 at 11:49 PM, Miquel Martos <[EMAIL PROTECTED]> wrote:
> Ara no ho recordo bé, pero crec que els routers flashejats amb OpenWRT
>  s'els hi pot activar un failsafe mode.
>  .. buscanthe trobat això :P
>
>  Plug in the router and wait for the DMZ LED to light up. Then
>  immediately press and hold the reset button for 2 seconds. If done
>  right the DMZ LED will quickly flash 3 times every second.
>  Total que si aconsegueixes això el podràs reflashejar.
>
>
>
>  2008/4/9, Ramon Amblàs <[EMAIL PROTECTED]>:
>  >
>  >  No, no em respon als pings.
>  >
>  >
>  >
>  >  En/na Joan Llopart ha escrit:
>  >  Pots entrar via telnet per la 192.168.1.1 despres de fer el reset?
>  >
>  > J
>  >
>  > 2008/4/9, Ramon Amblàs <[EMAIL PROTECTED]>:
>  >
>  >
>  >  Remenant remenant, ara el Linksys no em respon.
>  >  Els leds estan encesos com normalment, sense intermitències.
>  >  Provo d'engegar aguantant el botó de reset fin que deixa de fe 
> pampallugues
>  > (uns 30s) i res de res, l'hauré matat ?
>  >
>  >
>  >
>  >
>  >
>  >  En/na Joan Llopart ha escrit:
>  >  Configure'm-ho des del kamikaze amb instalacio default. Configurem la
>  > radio, edita amb la comanda 'vi' ('i' per insretar text. dues vegades
>  > ESC i ':wq' per sortir i guardar canvis) el fitxer
>  > /etc/config/wireless
>  >
>  > config wifi-device wl0
>  >  option type broadcom
>  >  option channel 5
>  >
>  > config wifi-iface
>  >  option device wl0
>  >  option network lan
>  >  option mode ap
>  >  option ssid oficina-public
>  >  option encryption off
>  >
>  > Ara configurem la xarxa, edita /etc/config/network, posant les IPs del
>  > teu exemple, poso uns DNS de telefonica:
>  >
>  > config interface loopback
>  >  option ifname lo
>  >  option proto static
>  >  option ipaddr 127.0.0.1
>  >  option netmask 255.0.0.0
>  >
>  > config interface lan
>  >  option ifname "eth0.0"
>  >  option type bridge
>  >  option proto static
>  >  option ipaddr 192.168.100.1
>  >  option netmask 255.255.255.0
>  >
>  > config interface wan
>  >  option ifname "eth0.1"
>  >  option proto static
>  >  option ipaddr 192.168.0.3
>  >  option netmask 255.255.255.0
>  >  option gateway 192.168.0.2
>  >  option dns "80.58.0.33 80.58.32.97"
>  >
>  > Ara anem al firewall. Has d'editar /etc/firewall.user i afegir al final:
>  >
>  >  iptables -t nat -A prerouting_wan -p tcp --dport 22 -j ACCEPT
>  >  iptables -A input_wan -p tcp --dport 22 -j ACCEPT
>  >  iptables -t nat -A prerouting_wan -p tcp --dport 80 -j ACCEPT
>  >  iptables -A input_wan -p tcp --dport 80 -j ACCEPT
>  >  iptables -A forwarding_rule -i br-lan -d 192.168.0.0/24 -j REJECT
>  >
>  > Les 4 primeres regles et permeten entrar al ssh i al panell web del
>  > Linksys per la Interficie WAN (192.168.0.3). La ultima bloqueja
>  > l'acces des de la radio a la xarxa de l'oficina.
>  >
>  > Fas un 'reboot' i a veure si funciona. He posat la config de memoria
>  > ... perque ara mateix no tinc acces al Linksys que tinc configurat
>  > d'aquesta manera, però hem sembla que està bé.
>  >
>  > Per afegir el panell web, hauras d'afegir a /etc/ipkg.conf els
>  > repositoris de x-wrt, i instalar el paquet corresponent. Esta explicat
>  > a la web de x-wrt. Jo ho faig tot des de consola, no faig servir mai
>  > el panell web ...
>  >
>  > Joan
>  >
>  > El 09/04/08, Ramon Amblàs <[EMAIL PROTECTED]> ha escrit:
>  >
>  >
>  >  Acabo de flashejar el Linksys amb el kamikaze 7.09
>  > (openwrt-wrt54g-2.6-squashfs.bin).
>  >  Hi entro per telnet però no per web :-(
>  >  És que no porta interfície web ho tinc que posar-hi algun altre paquet ?
>  >
>  >
>  >
>  >  En/na Lluís Dalmau ha escrit:
>  >  OpenWRT amb kamikaze i ho gestiones des de la interfície web, així ho
>  > acabo de deixar al Pompeu.
>  >
>  >
>  >
>  >  D'entrada pensava que es podia fer directament des de la interfície
>  > grà fica del dd-wrt.
>  > No he fet mai res amb iptables, mirarÃ(c) de llegir-me alguna cosa.
>  >
>  > Grà cies.
>  >
>  >
>  >
>  > En/na Joan Llopart ha escrit:
>  >
>  >
>  >  Es un "problema" de regles de firewall. El dd-wrt no l'he tocat quasi
>  > mai, no se com queda configurat per defecte. Pel que dius, sembla que
>  > el firewall bloqueja els pings (ICMP) al port WAN, has de "desfer"
>  > aquesta regla. Hem sembla que amb el DD-WRT es poden entrar regles de
>  > firewall mitjançant nvrams oi?
>  >
>  > Per a que desde 192.168.100.0/24 <http://192.168.100.0/24> no puguin
>  > entrar a l'oficina, però si ha internet, has de posar la seguent regla
>  > de firewall:
>  >
>  > iptables -A FORWARD -i $LAN -d 192.168.0.0/24 <http://192.168.0.0/24>
>  > -j REJECT
>  >
>  > Et poso $LAN de forma generica, no se com anomena el dd-wrt al bridge
>  > entre ports ethernet i radio.
>  >
>  > Joan
>  >
>  > El 09/04/08, *Ramon Amblà s* <[EMAIL PROTECTED]
>  > <mailto:[EMAIL PROTECTED]>> ha escrit:
>  >
>  >  Hola,
>  >
>  >  Ho voldria per una empresa, no estan connectats a guifi.net
>  >  <http://guifi.net>
>  >
>  >  Interessa que els convidats puguin fer servir l'ADSL però que no
>  >  vegin res mÃ(c)s de la xarxa.
>  >
>  >  Per això pensava en tenir dues xarxa la privada (que estaria
>  >  darrera la WAN) i la pública (la WLAN).
>  >  Si, ja sÃ(c) que el concepte Ã(c)s a l'inrevÃ(c)s Eye-wink
>  >
>  >  La xarxa tÃ(c) ip 192.168.0.0/24 <http://192.168.0.0/24>
>  >  L'ADSL Ã(c)s 192.168.0.2 <http://192.168.0.2>
>  >
>  >  Al Linksys amb dd-wrt li poso a la WAN 192.168.0.5
>  >  <http://192.168.0.5> i la porta d'enllaç cap a 192.168.0.2
>  >  <http://192.168.0.2>
>  >
>  >  A la LAN li poso la ip 192.168.100.1 <http://192.168.100.1>.
>  >  El poso en mode AP, activo el DHCP i em dona adreces 192.168.100.x
>  >
>  >  Endollo el Linksys pel port WAN cap al switch de la xarxa.
>  >  Des de un ordinador de "dins" si faig pings cap a 192.168.100.x no
>  >  respon, correcte.
>  >  Però tampoc respon 192.168.0.5 <http://192.168.0.5> (la ip de la
>  >  wan) Sad
>  >
>  >  Connecto un portà til amb wifi, em dona ip, puc sortir a Internet
>  >  (fantà stic!) però si faig pings a la xarxa de l'empresa tambÃ(c)
>  >  respon (això no ho voldria).
>  >
>  >  Em podeu ajudar ?
>  >
>  >
>  >  _______________________________________________
>  >  guifi-usuaris mailing list
>  >  guifi-usuaris@llistes.projectes.lafarga.org
>  >  <mailto:guifi-usuaris@llistes.projectes.lafarga.org>
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  > ------------------------------------------------------------------------
>  >
>  > _______________________________________________
>  > guifi-usuaris mailing list
>  > guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >  _______________________________________________
>  > guifi-usuaris mailing list
>  > guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  > Lluís
>  >
>  > _______________________________________________
>  > guifi-usuaris mailing list
>  > guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  >
>  >
>  > _______________________________________________
>  >  guifi-usuaris mailing list
>  >  guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  >  ________________________________
>  >
>  > _______________________________________________
>  > guifi-usuaris mailing list
>  > guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  > _______________________________________________
>  >  guifi-usuaris mailing list
>  >  guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  >  ________________________________
>  >
>  > _______________________________________________
>  > guifi-usuaris mailing list
>  > guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>  >
>  > _______________________________________________
>  >  guifi-usuaris mailing list
>  >  guifi-usuaris@llistes.projectes.lafarga.org
>  > 
> https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>  >
>  >
>
>
>  --
>  Miquel Martos
>
>
>
>  _______________________________________________
>  guifi-usuaris mailing list
>  guifi-usuaris@llistes.projectes.lafarga.org
>  https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris
>

_______________________________________________
guifi-usuaris mailing list
guifi-usuaris@llistes.projectes.lafarga.org
https://llistes.projectes.lafarga.org/cgi-bin/mailman/listinfo/guifi-usuaris

Reply via email to