I was wondering how Vehicles would handle a raft ... * With the optional rules on VXii5, armor has volume. That means it is possible to fill a hull entirely with wooden armor, no other components. No hydrodynamics, of course.
* The rules give wood 50 lbs. per cf. That is much higher than balsa or reed bundles, but on the other hand there are no rules for soaking over time. So maybe 50 lbs. is a good average figure. A 1,000-cf hull has a flotation of 62,500 lbs. and holds 50,000 lbs. of wooden armor. There is no corresponding rule for the volume of the structure, but I'm inclined to make that super-light anyway. High-DR logs connected by low-HP fasteners and ropes. That means less than 20% of Lwt. is payload -- much less, since there are the other parts of the raft. * On top of the hull is a superstructure, as big as possible but again super-light with flexible armor (curtains and mats). * The mast has a simple square rig. The speed will be in the low single digits. * A crewman with food and water for 50 days and a hammock (plus a slice of the commuity gear) is 900 lbs. To carry 15 men (6.75 tons), the raft will have to be in the 60 ton range. * A raft with a 2,000-cf hull would have a flotation of 62.5 tons. Call it 60 tons Lwt with a thin safety margin, and the drag is 2,433. It could have a 50' mast with a 1,000-sf sail. Thrust is 1,600 lbs. with a fresh breeze for 5 mph, or 640 lbs. with a light breeze for 4 mph. Actually 5.2 and 3.8, so there is a difference, but the cube root in the formula means speeds will be similar regardless of wind. 50 days at 4 mph are an impressive 4,800 miles, but of course the wind won't blow in the right direction. _______________________________________________ GurpsNet-L mailing list <[email protected]> http://mail.sjgames.com/mailman/listinfo/gurpsnet-l
