Message: 2 Date: Fri, 18 May 2012 09:08:00 -0400 From: "Rickard, Patty" <ricka...@mountunion.edu> To: Historical Costume <h-cost...@indra.com> Subject: Re: [h-cost] Thread- reluctant switcher needs suggestions Message-ID: <9303a5f18320a641acbabbce4dab25ca4a72796...@orion.campus.muc.prv> Content-Type: text/plain; charset="us-ascii"
Well, having used silk thread on a cotton garment & having had it pull its way through the fabric, I can attest to at least one misuse. (the silk matched better, that's all I can say) Patty -----Original Message----- From: h-costume-boun...@indra.com [mailto:h-costume-boun...@indra.com] On Behalf Of Sharon Collier Sent: Friday, May 18, 2012 2:59 AM To: 'Historical Costume' Subject: Re: [h-cost] Thread- reluctant switcher needs suggestions On a related note, I heard that using the wrong type of thread can damage the fabric. Anyone ever hear of this and/or have more info? Sharon C. Yes, if the thread is made from a fibre that is stronger than the fibres from which the fabric is made then it can tear, as Patty has experienced. Although it's more likely to happen in seams that are under stress. Embroidering silk on linen is unlikely to cause a problem, for instance, because it is not under tension. But using silk thread to sew a tight-fitting cotton bodice could be a problem. Strong fibres are linen, silk, polyester and nylon. Weak fibres are cotton and wool. But there's no mathematical equation here. A heavy or densely woven cotton fabric like denim or coutil might not be such a problem to sew with silk thread. Claire _______________________________________________ h-costume mailing list h-costume@mail.indra.com http://mail.indra.com/mailman/listinfo/h-costume