Did you mean 1+1/4" EMT pipe? 1.25" ?
On Tue, Jun 30, 2015 at 8:59 AM, Alex Gorbatchev <alex.gorbatc...@gmail.com> wrote: > Long edges were grooved and I added 1/4" EMT pipe. The pipes were then > taped with 6" bi-filament tape, then taped again with 3" aluminum foil tape > to protect from UVs. I then drilled 4 holes in each pipe for zip ties. The > EMT pipe acted as cage reinforcement AND a place to hook zip ties into. > Does that make sense? > > > > --- > http://twitter.com/alexgorbatchev > http://github.com/alexgorbatchev > http://npmawesome.com > > > On Tue, Jun 30, 2015 at 8:32 AM, Beacon Sway <scottgel...@gmail.com> > wrote: > >> Are the edges beveled or just 90 degrees with tape?? >> >> >> On Friday, June 26, 2015 at 5:49:51 PM UTC-4, Alex Gorbatchev wrote: >>> >>> Hey friends! >>> >>> Want to share my shelter / "hexayurt" from Burning Man 2014. This was >>> made from 9 standard 8x4' RMax 1" panels with a custom roof and a wind mill >>> exhaust. I added 1/4 EMT pipe to each vertical panel edge and connected all >>> panels with heavy duty zip ties which made assembly and disassembly >>> possible in 10-15 minutes. It's about 7.5' tall in the middle and 12x12' >>> wide. Comfortably held a queen size air bed, small table with two benches 4 >>> crates with clothing. >>> >>> The windmill worked amazingly well. During stronger winds and dust gusts >>> it was actually sucking out more dust from inside the yurt and kept the >>> place even cleaner. There are two small air filters installed in walls >>> opposite to the camera view. >>> >>> >>> <https://lh3.googleusercontent.com/-gSdNEKPgpdI/VY3Ho3mkogI/AAAAAAACHf8/1eOLjk91MLU/s1600/P1050857.JPG> >>> >>> -- >> You received this message because you are subscribed to a topic in the >> Google Groups "hexayurt" group. >> To unsubscribe from this topic, visit >> https://groups.google.com/d/topic/hexayurt/I8XXijf_jgg/unsubscribe. >> To unsubscribe from this group and all its topics, send an email to >> hexayurt+unsubscr...@googlegroups.com. >> To post to this group, send email to hexayurt@googlegroups.com. >> Visit this group at http://groups.google.com/group/hexayurt. >> For more options, visit https://groups.google.com/d/optout. >> > > -- > You received this message because you are subscribed to the Google Groups > "hexayurt" group. > To unsubscribe from this group and stop receiving emails from it, send an > email to hexayurt+unsubscr...@googlegroups.com. > To post to this group, send email to hexayurt@googlegroups.com. > Visit this group at http://groups.google.com/group/hexayurt. > For more options, visit https://groups.google.com/d/optout. > -- You received this message because you are subscribed to the Google Groups "hexayurt" group. To unsubscribe from this group and stop receiving emails from it, send an email to hexayurt+unsubscr...@googlegroups.com. To post to this group, send email to hexayurt@googlegroups.com. Visit this group at http://groups.google.com/group/hexayurt. For more options, visit https://groups.google.com/d/optout.