Le 30 janv. 2014 à 13:55, Alexandru Petrescu <[email protected]> a 
écrit :

> Pierre,
> 
> Thanks for the reply.
> 
> Le 30/01/2014 13:46, Pierre Pfister a écrit :
>> 
>> Le 30 janv. 2014 à 13:38, Alexandru Petrescu
>> <[email protected]> a écrit :
>> 
>>> Le 30/01/2014 13:28, Ole Troan a écrit :
>>>>>>> Could it be separate (existing) protocol?
>>>>>> 
>>>>>> if one had existed, sure. requirements from homenet-arch (I
>>>>>> might have missed some): - must support multi-homing - each
>>>>>> link should be assigned a stable prefix - efficient
>>>>>> allocation of prefixes - should support both IPv4 and IPv6
>>>>> 
>>>>> I meant this:
>>>>> 
>>>>> loosely coupled ---- separate (existing DHCPv6-PD) protocol
>>>>> triggering route updates to the routing protocol.
>>>> 
>>>> yes, DHCP PD comes up as a proposed solution quite frequently. I
>>>> just don't see how you can make DHCP PD fulfill the
>>>> requirements.
>>> 
>>> Well it does support multi-homing (Server allocates things to as
>>> many interfaces as needed), each link can be assigned a stable
>>> prefix (provided it triggers updates to the Routing protocol), the
>>> allocation is efficient (Server maintains dynamic databases,
>>> leases) and it supports both IPv4 ('IPv4 subnet allocation'
>>> RFC6656, DHCP transition et alia), and IPv6.
>>> 
>>> I miss something?
>> 
>> Well, in some cases DHCP seems to work, but not when you start
>> imagining multi-homed networks with multiple routers. Or maybe you
>> can tell me how to solve this situation with DHCP:
>> 
>> You have ISP1 connected with Router 1. ISP2 connected with Router 2.
>> Router 1, Router 2, and a third Router (Router 3), are connected on
>> the same link. ISP1 is delegated the prefix A/56 to Router 1. ISP2
>> is delegating the prefix B/56 to Router 2.
>> 
>> A host is connected behind Router 3.
> 
> Bear with me for a moment... is this topology what you meant?
> 
> 
>      ISP1               ISP2
>       |                  |
>    +-------+          +-------+
>    |Router1|A/56      |Router2|B/56
>    +-------+          +-------+
>       |                  |
>     --+-------+----------+--
>               |
>               |
>           +-------+
>           |Router3|
>           +-------+
>               |
>             +----+
>             |Host|(how can it get an address from A, and from B)
>             +----+
> 
> 
>> How can it get addresses from both prefixes ?
> 
> Before I try to figure it out - is the above topology what is meant? 
> Something I misplaced?

It is correct. 

Pierre

> 
> Alex
> 
>> 
>> Cheers,
>> 
>> Pierre
>> 
>> 
>>> 
>>> Alex
>>> 
>>>> 
>>>> cheers, Ole
>>>> 
>>> 
>>> 
>>> _______________________________________________ homenet mailing
>>> list [email protected]
>>> https://www.ietf.org/mailman/listinfo/homenet
>> 
>> 
>> 
> 
> 

_______________________________________________
homenet mailing list
[email protected]
https://www.ietf.org/mailman/listinfo/homenet

Reply via email to