Le 3 févr. 2014 à 07:11, Ray Bellis <[email protected]> a écrit :
> > On 3 Feb 2014, at 12:51, Alexandru Petrescu <[email protected]> > wrote: > >> In this setting the Router3 could run two DHCPRelay processes, and Router1 >> and 2 would be Servers. >> >> This would allow Host to obtain an address from each (==multi-homed). I’m not sure DHCP Relaying was intended to work with different DHCP servers. In any case, DHCP client was not. We can’t ask routers to relay DHCP from whatever DHCP server they obtain something from. In the case Router 2 has the same problem as router 3, we would have two relays ? And so on ? It would require a discovery mechanism and only the very first owner of a prefix would provide the addresses. In which case it would probably need knowledge of the network. And suddenly it starts looking like a different configuration protocol. At least it doesn’t look like how DHCP was designed first. Over more, if you put a host instead of Router 3, we would need the host to have multiple DHCP server. So it not only is inefficient in terms of addressing, but requires changes to the hosts… And assuming multiple DHCP server is not, in my mind, a small change. Pierre > > It could, but assume that Router3 doesn't yet know anything about the > upstream topology. > > Ray (no hat) > _______________________________________________ > homenet mailing list > [email protected] > https://www.ietf.org/mailman/listinfo/homenet _______________________________________________ homenet mailing list [email protected] https://www.ietf.org/mailman/listinfo/homenet
