According to my z/OS 1.9 SMP zones the distlib for the EDGAPISR source is AEDGSRC1
Therefore, change the statement as follows: ++SRC(EDGAPISR) TXLIB(SRCLIB) DISTLIB(ASAMPLIB) . To ++SRC(EDGAPISR) TXLIB(SRCLIB) DISTLIB(AEDGSRC1) . HTH, <snip> We were putting our EDGUX100 exit in place for RMM on z/OS 1.11 and were following the sample job provided in the manual to run the receive and apply. When we ran the job, we got this in the apply step: GIM40501E ** THE DISTLIB VALUE (ASAMPLIB) SPECIFIED FOR SRC EDGAPISR IN SYSMOD VMRMM01 DOES NOT MATCH THE DISTLIB VALUE (AEDGSRC1) IN THE SRC ENTRY FOR EDGAPISR. GIM22601I APPLY PROCESSING FAILED FOR SYSMOD VMRMM01. GIM20501I APPLY PROCESSING IS COMPLETE. THE HIGHEST RETURN CODE WAS 08. The only references to EDGAPISR in the book are on the "Installing the EDGUX100 default exit routine" page and they are marked with the vertical bar, indicating new information for this release. This module is not new, but including it in the exit is new: //SYSLIN DD * INCLUDE AEDGMOD1(EDGUX100) | INCLUDE AEDGMOD1(EDGAPISR) ENTRY EDGUX100 NAME EDGUX100(R) ++SRC(EDGUX100) TXLIB(SRCLIB) DISTLIB(ASAMPLIB) . |++SRC(EDGAPISR) TXLIB(SRCLIB) DISTLIB(ASAMPLIB) . ++SAMP(EDGUX100) TXLIB(SRCLIB) DISTLIB(ASAMPLIB) . |++SAMP(EDGAPISR) TXLIB(SRCLIB) DISTLIB(ASAMPLIB) . As there is no member for PISR in either the SRC or the SAMP libs, we just removed the statements from the job and got it applied. But has anyone else encountered this and resolved it in a different way? </snip> ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO Search the archives at http://bama.ua.edu/archives/ibm-main.html