How about a parameter that specifies when to perform the check, say CHECKTIME=020001 (unless your time zone changes at a different time)?
On Tue, Mar 13, 2012 at 7:42 AM, Paul Gilmartin <paulgboul...@aim.com> wrote: > On Tue, 13 Mar 2012 11:46:39 +0000, Jousma, David wrote: > >>I just read about that. Not sure it is too helpful, unless I am >>mis-understanding it? Time changes at 02:00 local time, based on what I >>read, the CICS clock would be off for the next 22 hours until the next local >>midnight?: >> >>AUTORESETTIME >>The AUTORESETTIME parameter specifies the action CICS should take if, at the >>next local midnight, the CICS time-of-day differs from the system time-of-day >>by more than 30 minutes; for example, setting clocks forward or back to >>adjust for summer and winter time. >> >>AUTORESETTIME={NO|YES} >>Valid values are as follows: >>NO >>CICS issues message DFHAP1500 to indicate that a CEMT PERFORM RESET command >>is required to synchronize the CICS time-of-day with the system time-of-day. >>YES >>CICS issues a PERFORM RESET command to synchronize the CICS time-of-day with >>the system time-of-day >>Note: Setting clocks back might cause end-of-day statistics to be written >>twice. >> > Sigh. Sounds like a powerful argument for performing the RESET > instantaneously instead of at midnight. Or the customer's using > auto ops to issue the RESET command every day at 01:01 and 02:01. > > Why does CICS even have its own time-of-day when there's a perfectly > good system time-of-day it could use? Simpler is better. And why a > 30 minute fuzz? One second should be enough to trigger a RESET. > > -- gil > > ---------------------------------------------------------------------- > For IBM-MAIN subscribe / signoff / archive access instructions, > send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN -- Mike A Schwab, Springfield IL USA Where do Forest Rangers go to get away from it all? ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@bama.ua.edu with the message: INFO IBM-MAIN