That is apparently the issue on the system to which I have access, zoaversion there returns "CUT V1.1.1", while the latest version seems to be 1.2.1.
Thanks for the update. Peter -----Original Message----- From: IBM Mainframe Discussion List <IBM-MAIN@LISTSERV.UA.EDU> On Behalf Of Ed Jaffe Sent: Thursday, March 2, 2023 1:45 PM To: IBM-MAIN@LISTSERV.UA.EDU Subject: Re: ZOAU [was: RE: Mainframe REXX (Re: Badmouthing Rexx and ooRexx - again (Re: zOSMF and zOWE for non-mainframers] On 3/2/2023 8:22 AM, Farley, Peter wrote: > One thing I will add from actual testing I have done with ZOAU facilities -- > they are HORRIBLY slow. Yes, you can run them from off-platform - that was > their intended raison d'etre - and the fact that you even CAN do that if you > really, really need it is a Good Thing (tm). The original version of ZOAU used SDSF REXX and that was indeed quite slow. Ugh... The latest version uses direct SSI calls written in C and performs much better. -- This message and any attachments are intended only for the use of the addressee and may contain information that is privileged and confidential. If the reader of the message is not the intended recipient or an authorized representative of the intended recipient, you are hereby notified that any dissemination of this communication is strictly prohibited. If you have received this communication in error, please notify us immediately by e-mail and delete the message and any attachments from your system. ---------------------------------------------------------------------- For IBM-MAIN subscribe / signoff / archive access instructions, send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
