That would cause the disk to be LINKed, but it still needs to be ACCESSed as well.
Chris, your best advice is to set up a minidisk that is for "public" stuff that you don't want to put on the MAINT 190 or 19E minidisk (the ONLY two system disks that are automatically accessed when CMS is IPL'ed). You will find that there are going to be things that you want all users to have access to, and you may want to override certain things on the 190/19E minidisks so access your local "public" disk at a filemode lower than S (say R or Q). I am assuming that you have standard PROFILE statements in your CP source directory (whether using an ESM like VM:Secure, DIRMAINT or nothing at all). For the purposes of this discussion, let's say you create a userid named PUBLIC and its 191 disk is what you want all users to access as R, linked as 319. You'll create a little exec named VMCONFIG to do your local customizations: 1. Add the following to your directory PROFILE(s): LINK PUBLIC 191 319 RR 2. Modify the SYSPROF EXEC on the MAINT 490/190 disk(s) to call a local user exit. HINT: Your code should execute right after the 'SET COMDIR RELOAD' statement. Remember that SYSPROF EXEC is in the INSTSEG so you'll need to resave this once your updates have been made, and of course since this is a CMS system minidisk makes your changes to MAINT 490, test them, then promote them to MAINT 190 using VMSES update procedures. 3. Create your VMCONFIG EXEC and put it on PUBLIC 191. It can be as simple as one statement which reads "ACCESS 319 R", but of course since ALL users will now execute this you can be a lot more creative if you choose to. My VMCONFIG customizes virtual machines based on CP account numbers and ACIGROUPs. That's it! You now have a public disk that all users will have access to. It preceeds the CMS minidisks so you can override programs on the CMS minidisks if you need to (assuming they aren't NUCX or EXEC loaded, in which case you'll need to make sure the RIGHT programs get loaded accordingly). Put ANY stuff that you want all users to have access to on PUBLIC 191 and they'll automagically pick up access to it at filemode "R". -Mike -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Tuesday, May 27, 2008 9:50 AM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Publicly Accessible minidisks On Tuesday, 05/27/2008 at 09:41 EDT, "Hilliard, Chris" <[EMAIL PROTECTED]> wrote: > I?m wrapping up the install of DFSMS/VM?yikes?not the most intuitive install I? > ve ever done. Anyway, one of the installation steps calls for making the DFSMS > 1B5 minidisk publicly accessible. How do you do this short of > including a link > for it in each user directory entry? Is there some sort of ?link > list? > facility like there is in z/OS? Oh, and I forgot to mention that authorizing the disk to be publicly available does not automatically cause a LINK to be issued. This is normally handled by placing the LINK statement in a directory profile in USER DIRECT that gets INCLUDEd. See "Creating directory profiles" in Chapter 17 of the CP Planning and Admin book. Alan Altmark z/VM Development IBM Endicott