Marcy, Right you are. Thanks for the info.
HITACHI DATA SYSTEMS Raymond E. Noal Senior Technical Engineer Office: (408) 970 - 7978 -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Marcy Cortes Sent: Thursday, July 10, 2008 7:51 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Query what the name of the SYTEM CONFIG file used was? Q CPLOAD will tell you that one. Marcy "This message may contain confidential and/or privileged information. If you are not the addressee or authorized to receive this for the addressee, you must not use, copy, disclose, or take any action based on this message or any information herein. If you have received this message in error, please advise the sender immediately by reply e-mail and delete this message. Thank you for your cooperation." -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Raymond Noal Sent: Thursday, July 10, 2008 7:44 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] Query what the name of the SYTEM CONFIG file used was? QUERY IPLPARMS only seems to give you the data from the PARM section of the SAIPL screen. What if you wanted to know which extent was used? Is there a query for that parameter? HITACHI DATA SYSTEMS Raymond E. Noal Senior Technical Engineer Office: (408) 970 - 7978 -----Original Message----- From: The IBM z/VM Operating System [mailto:[EMAIL PROTECTED] On Behalf Of Alan Altmark Sent: Wednesday, July 09, 2008 8:38 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Query what the name of the SYTEM CONFIG file used was? On Wednesday, 07/09/2008 at 08:24 EDT, Marcy Cortes <[EMAIL PROTECTED]> wrote: > Is there a way to query this? > Particularly the one that got chosen by putting FNnnnnn in the > LOADPARM field > on the HMC? Check QUERY IPLPARMS. Alan Altmark z/VM Development IBM Endicott
