How about set vswitch xx disconnect and then set vswitch xx connect ? ________________________________
From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of McBride, Catherine Sent: Friday, July 02, 2010 1:35 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: [IBMVM] Speaking of VSWITCHES It got errors that the devices were already attached to DTCVSW1. So I detached them manually and re-executed the SET VSWITCH command again, and now we have q vswitch VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-01 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0800.P00 Controller: NONE RDEV: 0810.P00 Controller: NONE RDEV: 0860.P00 Controller: NONE VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-02 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0803.P00 Controller: NONE Error: Detached RDEV: 0813.P00 Controller: NONE Error: Path severed RDEV: 0863.P00 Controller: NONE Error: Path severed At least no errors but it still isn't working. "Initialization in progress" ________________________________ From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf Of Mark Pace Sent: Friday, July 02, 2010 3:24 PM To: IBMVM@LISTSERV.UARK.EDU Subject: Re: Speaking of VSWITCHES Try SET VSWITCH VSWITCH1 CONNECT On Fri, Jul 2, 2010 at 4:22 PM, McBride, Catherine <cmcbr...@kable.com> wrote: Somebody rebooted the switch that our OSA cards are plugged into. Our VSWITCH tried to recover by failing over from VSWITCH1 to VSWITCH2. Unfortunately, both of them terminate at the same physical switch and now we can't get either one to activate. Output of Q VSWITCH looks like this: q vswitch VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-01 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0800.P00 Controller: NONE Error: Detached RDEV: 0810.P00 Controller: NONE Error: Path severed RDEV: 0860.P00 Controller: NONE Error: Path severed VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: INFINITE PERSISTENT RESTRICTED NONROUTER Accounting: OFF VLAN Unaware MAC address: 02-00-00-00-00-02 State: Initialization in progress IPTimeout: 5 QueueStorage: 8 Isolation Status: OFF RDEV: 0803.P00 Controller: NONE Error: Detached RDEV: 0813.P00 Controller: NONE Error: Path severed RDEV: 0863.P00 Controller: NONE Error: Path severed I've tried attaching the RDEV's to DTCSW1 and DTCSW2, and autologged both of these as well. Queries of the RDEVS show the following: OSA 0800 ATTACHED TO DTCVSW1 0800 DEVTYPE OSA CHPID F0 OSD Ready; T=0.01/0.01 15:13:52 q 810 OSA 0810 ATTACHED TO DTCVSW1 0810 DEVTYPE OSA CHPID F1 OSD Ready; T=0.01/0.01 15:13:55 q 860 OSA 0860 ATTACHED TO DTCVSW1 0860 DEVTYPE OSA CHPID F2 OSD Ready; T=0.01/0.01 15:14:01 The CHPIDS are online. We even popped the cover and looked at the blinking lights on the cards. DTCVSW1, DTCVSW2, and TCPIP are all logged on and active. I've tried varying off and varying on the devices, RESET, READY, etc. Any suggestions late on a Friday afternoon? -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
