Right - from all LPARs that have it.  That will cause the microcode on it to be 
reloaded and is your last big stick.
If that doesn't work, you beat on the switch people until they tell you what 
change they put in that they must now back off :)
And then have them provide some switch redundancy!

Marcy  

 

________________________________

From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On Behalf 
Of Mark Pace
Sent: Friday, July 02, 2010 1:40 PM
To: IBMVM@LISTSERV.UARK.EDU
Subject: Re: [IBMVM] Speaking of VSWITCHES



I wouldn't think would have to reset the OSA, but if the disconnect and connect 
do not work I would try varying off/on the CHPID.


On Fri, Jul 2, 2010 at 4:36 PM, Marcy Cortes <marcy.d.cor...@wellsfargo.com> 
wrote:


        How about
        set vswitch xx disconnect
        and then
        set vswitch xx connect
        ?
        
        ________________________________
        
        From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On 
Behalf Of McBride, Catherine
        Sent: Friday, July 02, 2010 1:35 PM
        
        To: IBMVM@LISTSERV.UARK.EDU
        
        Subject: Re: [IBMVM] Speaking of VSWITCHES
        


        It got errors that the devices were already attached to DTCVSW1.
        So I detached them manually and re-executed the SET VSWITCH command 
again, and now we have
        
        q vswitch
        VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12   Maxconn: INFINITE
         PERSISTENT  RESTRICTED    NONROUTER                 Accounting: OFF
         VLAN Unaware
         MAC address: 02-00-00-00-00-01
         State: Initialization in progress
         IPTimeout: 5         QueueStorage: 8
         Isolation Status: OFF
         RDEV: 0800.P00            Controller: NONE
         RDEV: 0810.P00            Controller: NONE
         RDEV: 0860.P00            Controller: NONE
        VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0    Maxconn: INFINITE
         PERSISTENT  RESTRICTED    NONROUTER                 Accounting: OFF
         VLAN Unaware
         MAC address: 02-00-00-00-00-02
         State: Initialization in progress
         IPTimeout: 5         QueueStorage: 8
         Isolation Status: OFF
         RDEV: 0803.P00            Controller: NONE     Error:  Detached
         RDEV: 0813.P00            Controller: NONE     Error:  Path severed
         RDEV: 0863.P00            Controller: NONE     Error:  Path severed
        
        At least no errors but it still isn't working.  "Initialization in 
progress"
        
        ________________________________
        
        From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On 
Behalf Of Mark Pace
        Sent: Friday, July 02, 2010 3:24 PM
        To: IBMVM@LISTSERV.UARK.EDU
        Subject: Re: Speaking of VSWITCHES
        
        
        Try
        SET VSWITCH VSWITCH1 CONNECT
        
        
        On Fri, Jul 2, 2010 at 4:22 PM, McBride, Catherine <cmcbr...@kable.com> 
wrote:
        
        
               Somebody rebooted the switch that our OSA cards are plugged 
into.  Our VSWITCH tried to recover by failing over from VSWITCH1 to VSWITCH2.  
Unfortunately, both of them terminate at the same physical switch and now we 
can't get either one to activate.  Output of Q VSWITCH looks like this:
        
               q vswitch
               VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12   Maxconn: 
INFINITE
                 PERSISTENT  RESTRICTED    NONROUTER                 
Accounting: OFF
                 VLAN Unaware
                 MAC address: 02-00-00-00-00-01
                 State: Initialization in progress
                 IPTimeout: 5         QueueStorage: 8
                 Isolation Status: OFF
                 RDEV: 0800.P00            Controller: NONE     Error:  Detached
                 RDEV: 0810.P00            Controller: NONE     Error:  Path 
severed
                 RDEV: 0860.P00            Controller: NONE     Error:  Path 
severed
               VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0    Maxconn: 
INFINITE
                 PERSISTENT  RESTRICTED    NONROUTER                 
Accounting: OFF
                 VLAN Unaware
                 MAC address: 02-00-00-00-00-02
                 State: Initialization in progress
                 IPTimeout: 5         QueueStorage: 8
                 Isolation Status: OFF
                 RDEV: 0803.P00            Controller: NONE     Error:  Detached
                 RDEV: 0813.P00            Controller: NONE     Error:  Path 
severed
                 RDEV: 0863.P00            Controller: NONE     Error:  Path 
severed
        
               I've tried attaching the RDEV's to DTCSW1 and DTCSW2, and 
autologged both of these as well.
               Queries of the RDEVS show the following:
        
               OSA  0800 ATTACHED TO DTCVSW1  0800 DEVTYPE OSA         CHPID F0 
OSD
               Ready; T=0.01/0.01 15:13:52
               q 810
               OSA  0810 ATTACHED TO DTCVSW1  0810 DEVTYPE OSA         CHPID F1 
OSD
               Ready; T=0.01/0.01 15:13:55
               q 860
               OSA  0860 ATTACHED TO DTCVSW1  0860 DEVTYPE OSA         CHPID F2 
OSD
               Ready; T=0.01/0.01 15:14:01
               The CHPIDS are online.  We even popped the cover and looked at 
the blinking lights on the cards.
               DTCVSW1, DTCVSW2, and TCPIP are all logged on and active.
        
               I've tried varying off and varying on the devices, RESET, READY, 
etc.
               Any suggestions late on a Friday afternoon?
        
        
        
        
        
        
        
        --
        Mark Pace
        Mainline Information Systems
        1700 Summit Lake Drive
        Tallahassee, FL. 32317
        




-- 
Mark Pace
Mainline Information Systems
1700 Summit Lake Drive
Tallahassee, FL. 32317

Reply via email to