I wouldn't think would have to reset the OSA, but if the disconnect and connect do not work I would try varying off/on the CHPID.
On Fri, Jul 2, 2010 at 4:36 PM, Marcy Cortes <marcy.d.cor...@wellsfargo.com>wrote: > How about > set vswitch xx disconnect > and then > set vswitch xx connect > ? > > ________________________________ > > From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On > Behalf Of McBride, Catherine > Sent: Friday, July 02, 2010 1:35 PM > To: IBMVM@LISTSERV.UARK.EDU > Subject: Re: [IBMVM] Speaking of VSWITCHES > > > It got errors that the devices were already attached to DTCVSW1. > So I detached them manually and re-executed the SET VSWITCH command again, > and now we have > > q vswitch > VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: INFINITE > PERSISTENT RESTRICTED NONROUTER Accounting: OFF > VLAN Unaware > MAC address: 02-00-00-00-00-01 > State: Initialization in progress > IPTimeout: 5 QueueStorage: 8 > Isolation Status: OFF > RDEV: 0800.P00 Controller: NONE > RDEV: 0810.P00 Controller: NONE > RDEV: 0860.P00 Controller: NONE > VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: INFINITE > PERSISTENT RESTRICTED NONROUTER Accounting: OFF > VLAN Unaware > MAC address: 02-00-00-00-00-02 > State: Initialization in progress > IPTimeout: 5 QueueStorage: 8 > Isolation Status: OFF > RDEV: 0803.P00 Controller: NONE Error: Detached > RDEV: 0813.P00 Controller: NONE Error: Path severed > RDEV: 0863.P00 Controller: NONE Error: Path severed > > At least no errors but it still isn't working. "Initialization in > progress" > > ________________________________ > > From: The IBM z/VM Operating System [mailto:ib...@listserv.uark.edu] On > Behalf Of Mark Pace > Sent: Friday, July 02, 2010 3:24 PM > To: IBMVM@LISTSERV.UARK.EDU > Subject: Re: Speaking of VSWITCHES > > > Try > SET VSWITCH VSWITCH1 CONNECT > > > On Fri, Jul 2, 2010 at 4:22 PM, McBride, Catherine <cmcbr...@kable.com> > wrote: > > > Somebody rebooted the switch that our OSA cards are plugged into. > Our VSWITCH tried to recover by failing over from VSWITCH1 to VSWITCH2. > Unfortunately, both of them terminate at the same physical switch and now > we can't get either one to activate. Output of Q VSWITCH looks like this: > > q vswitch > VSWITCH SYSTEM VSWITCH1 Type: VSWITCH Connected: 12 Maxconn: > INFINITE > PERSISTENT RESTRICTED NONROUTER Accounting: > OFF > VLAN Unaware > MAC address: 02-00-00-00-00-01 > State: Initialization in progress > IPTimeout: 5 QueueStorage: 8 > Isolation Status: OFF > RDEV: 0800.P00 Controller: NONE Error: Detached > RDEV: 0810.P00 Controller: NONE Error: Path > severed > RDEV: 0860.P00 Controller: NONE Error: Path > severed > VSWITCH SYSTEM VSWITCH2 Type: VSWITCH Connected: 0 Maxconn: > INFINITE > PERSISTENT RESTRICTED NONROUTER Accounting: > OFF > VLAN Unaware > MAC address: 02-00-00-00-00-02 > State: Initialization in progress > IPTimeout: 5 QueueStorage: 8 > Isolation Status: OFF > RDEV: 0803.P00 Controller: NONE Error: Detached > RDEV: 0813.P00 Controller: NONE Error: Path > severed > RDEV: 0863.P00 Controller: NONE Error: Path > severed > > I've tried attaching the RDEV's to DTCSW1 and DTCSW2, and autologged > both of these as well. > Queries of the RDEVS show the following: > > OSA 0800 ATTACHED TO DTCVSW1 0800 DEVTYPE OSA CHPID F0 OSD > Ready; T=0.01/0.01 15:13:52 > q 810 > OSA 0810 ATTACHED TO DTCVSW1 0810 DEVTYPE OSA CHPID F1 OSD > Ready; T=0.01/0.01 15:13:55 > q 860 > OSA 0860 ATTACHED TO DTCVSW1 0860 DEVTYPE OSA CHPID F2 OSD > Ready; T=0.01/0.01 15:14:01 > The CHPIDS are online. We even popped the cover and looked at the > blinking lights on the cards. > DTCVSW1, DTCVSW2, and TCPIP are all logged on and active. > > I've tried varying off and varying on the devices, RESET, READY, > etc. > Any suggestions late on a Friday afternoon? > > > > > > > > -- > Mark Pace > Mainline Information Systems > 1700 Summit Lake Drive > Tallahassee, FL. 32317 > -- Mark Pace Mainline Information Systems 1700 Summit Lake Drive Tallahassee, FL. 32317
