I thought VM64798, VM64879, and VM64881 were the only APARs needed for z196 compatibility for z/VM 5.4.
You are 6.1 so maybe it is different. But if not, I better find out fast. Michael MacIsaac <mike...@us.ibm.com> Sent by: The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> 11/05/2010 03:12 PM Please respond to The IBM z/VM Operating System <IBMVM@LISTSERV.UARK.EDU> To IBMVM@LISTSERV.UARK.EDU cc Subject APARs and PTFs for the z196 Hello list, I'm trying to verify that I've got all the latest service for the z196. I start with a z/VM 6.1 system that is up to the latest RSU, service level 1002. ==> q cplevel z/VM Version 6 Release 1.0, service level 1002 (64-bit) Generated at 11/05/10 13:53:17 EDT IPL at 11/05/10 14:50:40 EDT Then, disregarding HCD and HCM, I believe the list of APARs to apply is "VM64774 VM64798 VM64879 VM64881 VM64793 VM64820 VM64814 VM64807 VM64799". I order them from ShopZseries and SERVICE ALL/PUT2PROD them. I SHUTDOWN REIPL then write and run a short EXEC to verify: ==> type check910 exec /* EXEC to check for z196 PTFs */ 'service cp status VM64774' 'service cp status VM64798' 'service cp status VM64879' 'service cp status VM64881' 'service cp status VM64793' 'service perftk status VM64820' 'service cp status VM64814' 'service cms status VM64799' ==> check910 VMFSRV2760I SERVICE processing started VMFSRV1226I CP (6VMCPR10%CP) APAR VM64774 (PTF UM33169) status: VMFSRV1226I RECEIVED 11/05/10 13:52:51 VMFSRV1226I APPLIED 11/05/10 13:52:52 VMFSRV1226I BUILT 11/05/10 13:53:57 VMFSRV1226I PUT2PROD 11/05/10 13:55:55 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I CP (6VMCPR10%CP) APAR VM64798 (PTF UM33153) status: VMFSRV1226I RECEIVED 11/05/10 13:13:20 VMFSRV1226I APPLIED 11/05/10 13:13:22 VMFSRV1226I BUILT 11/05/10 13:15:43 VMFSRV1226I PUT2PROD 11/05/10 13:19:25 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I CP (6VMCPR10%CP) APAR VM64879 (PTF UM33172) status: VMFSRV1226I RECEIVED 11/05/10 13:52:51 VMFSRV1226I APPLIED 11/05/10 13:52:52 VMFSRV1226I BUILT 11/05/10 13:53:57 VMFSRV1226I PUT2PROD 11/05/10 13:55:55 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I CP (6VMCPR10%CP) APAR VM64881 (PTF UM33184) status: VMFSRV1226I RECEIVED 11/05/10 13:52:51 VMFSRV1226I APPLIED 11/05/10 13:52:52 VMFSRV1226I BUILT 11/05/10 13:53:57 VMFSRV1226I PUT2PROD 11/05/10 13:55:55 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I CP (6VMCPR10%CP) APAR VM64793 (PTF UM33093) status: VMFSRV1226I RECEIVED 11/05/10 13:13:20 VMFSRV1226I APPLIED 11/05/10 13:13:22 VMFSRV1226I BUILT 11/05/10 13:15:43 VMFSRV1226I PUT2PROD 11/05/10 13:19:25 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I PERFTK (6VMPTK10%PERFTK) APAR VM64820 (PTF UM33158) status: VMFSRV1226I RECEIVED 11/05/10 13:53:24 VMFSRV1226I APPLIED 11/05/10 13:53:25 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I CP (6VMCPR10%CP) APAR VM64814 (PTF UM33148) status: VMFSRV1226I RECEIVED 11/05/10 13:13:20 VMFSRV1226I APPLIED 11/05/10 13:13:22 VMFSRV1226I BUILT 11/05/10 13:15:43 VMFSRV1226I PUT2PROD 11/05/10 13:19:25 VMFSRV2760I SERVICE processing completed successfully VMFSRV2760I SERVICE processing started VMFSRV1226I CMS (6VMCMS10%CMS) APAR VM64799 (PTF UM33141) status: VMFSRV1226I RECEIVED 11/05/10 13:52:36 VMFSRV1226I APPLIED 11/05/10 13:52:37 VMFSRV1226I BUILT 11/05/10 13:53:57 VMFSRV1226I PUT2PROD 11/05/10 13:55:55 VMFSRV2760I SERVICE processing completed successfully Does this sound right? There is also one "non-SES" PTF (UV61111) for EREP that also must be applied separately, but that is a different story. Any feedback will be appreciated. Thanks. "Mike MacIsaac" <mike...@us.ibm.com> (845) 433-7061
