> Pagefile is 2GB (1 GB on drive C: the other on Drive E:) I have > never "reset" it. Should I just make it 0 on both drives, reboot and > then reset to 1GB on each drive??
Sure. > Registry is 12MB with a maximum of 48MB Okay. > I am running NAI's Netshield 4.5, but have uninstalled it and have the same > problem with it or without it Yep. > During the 5 minutes it takes to load the cpu usage fluctuates between 5 and > 20%. I just ran it and it peaked for about a second at 33%. Never more > than that. Interesting. If it were only thrashing through the Registry to get at your userbase, it would likely be at 100% for the whole load. > I have reinstalled the web templates several times Good. > Ipswitch tested the dummy domain theory and did not have a problem. > However, they only put about 30 users in it. My theory all along has been > that the problem is loading the user list in the drop down menu. I know it > shouldn't take that long, but that seems to be what takes the most time. Yes, for your user count, the delay should not be noticeable. So try loading 2000 users into the dummy domain--that's scientific, no? Also, if you've got other backups to CYA, backing up and restoring the Registry from NTBACKUP is a way to check for Registry corruption. -Sandy Please visit http://www.ipswitch.com/support/mailing-lists.html to be removed from this list. An Archive of this list is available at: http://www.mail-archive.com/imail_forum%40list.ipswitch.com/ Please visit the Knowledge Base for answers to frequently asked questions: http://www.ipswitch.com/support/IMail/
