It takes less than a second when done manually.
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Christopher L. Sweeney Sent: Wednesday, August 27, 2003 12:21 PM To: InterMapper Discussion At 12:13 PM -0600 8/27/03, Mike Lieberman wrote: >We had gotten our temp probe working under the previous beta of IM. We >simply upgraded to the newest beta in our Debian box and the temp probe >is via IM reporting "Down" the "Reason:Command timed out" > >>From the Debian box we manually checked the probe with the exact >>command >from IM (I know because I copied and pasted the command to make sure. >Manually the command still works. > >NS1:/home/mike/InterMapper_Settings/Tools# ./check_temptraxe -H >216.169.4.18 -p 1 -w 80 -c 90 Temp Warning: Room1 Rack Temp = 80.9 F 4.1.1b4 will time out command-line probes that take too long, just as previous versions time out other probes that take too long. Sounds like we need to be more forgiving and allow more time for command-line probes. I'll be more generous for the release version. How long would you say it takes for your probe to complete when it completes successfully from the command line? -- Christopher -- ================================================ Christopher L. Sweeney [EMAIL PROTECTED] http://www.dartware.com/ ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED] ____________________________________________________________________ List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/ To unsubscribe: send email to: [EMAIL PROTECTED]
