At 12:42 PM -0600 8/27/03, Mike Lieberman wrote:
It takes less than a second when done manually.

Thanks. I think the default timeout right now is three seconds, which should be enough, then, but it's possible that it's taking too long to setup the command line shell and/or to notice that the probe has completed.


In any case, I'll make it more forgiving and see if that takes care of the problem.

-- Christopher



-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Christopher L.
Sweeney
Sent: Wednesday, August 27, 2003 12:21 PM
To: InterMapper Discussion

At 12:13 PM -0600 8/27/03, Mike Lieberman wrote:
We had gotten our temp probe working under the previous beta of IM. We
simply upgraded to the newest beta in our Debian box and the temp probe
is via IM reporting "Down" the "Reason:Command timed out"

From the Debian box we manually checked the probe with the exact
command
from IM (I know because I copied and pasted the command to make sure.
Manually the command still works.

NS1:/home/mike/InterMapper_Settings/Tools# ./check_temptraxe -H
216.169.4.18 -p 1 -w 80 -c 90 Temp Warning: Room1 Rack Temp = 80.9 F

4.1.1b4 will time out command-line probes that take too long, just as previous versions time out other probes that take too long. Sounds like we need to be more forgiving and allow more time for command-line probes. I'll be more generous for the release version.

How long would you say it takes for your probe to complete when it completes
successfully from the command line?

-- Christopher

--
================================================
Christopher L. Sweeney
[EMAIL PROTECTED]
http://www.dartware.com/

____________________________________________________________________
List archives:
http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]


____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]


--
================================================
Christopher L. Sweeney
[EMAIL PROTECTED]
http://www.dartware.com/

____________________________________________________________________
List archives: http://www.mail-archive.com/intermapper-talk%40list.dartware.com/
To unsubscribe: send email to: [EMAIL PROTECTED]

Reply via email to